[PCB_FORUM] Re: Rat T's

Hi

I believe it works for us.  If you assign 0 (zero) as the tolerance, they won't 
move.

Cheers,
Richard

>>> "Rachel Bremner" <rbremner23@xxxxxxxxxxx> 21/07/2006 1:02 p.m. >>>
Hi All,

I've checked the archives for info and it seems over a year since this was 
broached. Any way to keep the rat t's from moving when constraints are 
updated? is this still a bug, or does the FIXED_T_TOLERANCE work now? We had 
T's moving when ECS was updated, but they were not fixed at the time. We are 
debating removing them for good if this is still a problem.

Thanks,
Rachel

_________________________________________________________________
FREE pop-up blocking with the new MSN Toolbar * get it now! 
http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/ 

-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx 
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/ 

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx 
-----------------------------------------------------------

NOTICE: This message contains privileged and confidential
information intended only for the use of the addressee
named above. If you are not the intended recipient of
this message you are hereby notified that you must not
disseminate, copy or take any action in reliance on it.
If you have received this message in error please
notify Allied Telesis Labs Ltd immediately.
Any views expressed in this message are those of the
individual sender, except where the sender has the
authority to issue and specifically states them to
be the views of Allied Telesis Labs.
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: