[PCB_FORUM] Property defined by component library

Hello All.

I was trying SPB16.2 for diff pairs swap enhancement.

I tried to add DIFF_PAIR_PINS_POS/NEG on the chips.prt file of a EP3C...
Then I got autogenerated diff pairs in Allegro.

But the device only use some of diff pairs, other pins are used as
normal IO.
Then, both nets connected on these pairs of pins were defined as diff
pairs and want to be routed as diff pairs.
But both nets are totally different.

I decided to remove chips.prt DIFF_PAIR_PINS_POS/NEG properties.
But whatever I tried (package again, remove properties from state file,
remove the symbol on the schematic,...)
I tried to keep DIFF_PAIR_PINS_POS/NEG as empty =''; but not better....
nets are still defined as "diff pairs defined by component library":


Diff pair members: net CMD_SEL_0
                     net CMD_CLK_4
  Diff pair defined by component library

  Properties attached to net
    LOGICAL_PATH      = @roman_pots_motherboard_lib.roman_pots_motherb
                        oard_v4(sch_1):cmd_clk_4
  Member of Groups:
    DIFF_PAIR       : DP_CMD_CLK_4

This information seems to be stored directly inside Allegro.
If I import logic in a empty board, it's OK.
Even if I paste a clipboard from the old BRD, it is still OK.

Does anybody know how to remove it? (before I send a SR to Cadence...)

Thanksin advance.

        William.

-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: