[PCB_FORUM] Re: (No To: icu-pcb-forum@freelists.org
- From: gnieski_mike@xxxxxxx
- To: icu-pcb-forum@xxxxxxxxxxxxx
- Date: Wed, 23 Aug 2006 11:12:20 -0400
working just fine....the second time around, forgot to go back to
my last save (duh!)....thanks again, Mike. It's probably been 10
years
since I've had to do this.
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Barbara Seeger
Sent: Wednesday, August 23, 2006 10:55 AM
To: undisclosed-recipients
Subject: [PCB_FORUM] Re: (No To: icu-pcb-forum@xxxxxxxxxxxxx
Command: j2script <source_jrl_file> <target_allegro_script>
and of course delete the part at the end which caused the crash before
replaying the script. I believe you can also do it through the File -
script - generate UI section of the editor too.
- Barbara Seeger - Cadence
>
> Just crashed out of Windows and have a preserved .jrl file, is there
> a utility other than editing
> the .jrl file to recover my lost work? In the past I have edited a
> saved jrl file and read it in as
> a script to recover any loss.
>
> thanks,
> Mike Gnieski
> EMC2 Corp
> Hopkinton, MA
>
> -----------------------------------------------------------
> To subscribe/unsubscribe:
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
>
> To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
>
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> -----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
Other related posts:
