[PCB_FORUM] Re: How to import an allegro layout design to Pads layout?
- From: "Austin Franklin" <allegrolist@xxxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Wed, 26 Aug 2009 18:59:47 -0400
Hi Mostafa,
I don't know of any easy way to do this without using a pay for 3rd party
tool. You can import from PADS ASCII into Allegro pretty well, but the
other way around isn't so easy. If you find an easy way, I'd like to know.
Regards,
Austin
> -----Original Message-----
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of mostafa
> Sent: Wednesday, August 26, 2009 6:52 PM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] How to import an allegro layout design to Pads
> layout?
>
>
> Hi All.
> I need help on how to convert or import an allegro layout to Pads.
> what files needs to be generated in allegro?
> Is the conversion going to be smooth or will creates lots of issues?
> can i add the allegro Library into pad part library?
>
> Thank you for any input.
>
>
>
> -----------------------------------------------------------
> To subscribe/unsubscribe:
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
>
> To view the archives of this list go to
> //www.freelists.org/archives/icu-pcb-forum/
>
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> -----------------------------------------------------------
>
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
Other related posts:
