Hi Felix 1.Edit select Move option 2.Right click mouse select temp group 3.go to options tab bar from the control panel on right side of the screen select user pick from the rotation type 4.Select the symbol in group and right click mouse complete 5.again right click mouse select rotate This will help you.Select user pick option from the control panel after that rotate it. Regards K.Vivek -----Original Message----- From: sureshbabu [mailto:suresh@xxxxxxxxxxxxxxx] Sent: Monday, April 04, 2005 2:43 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: Group rotation in Allegro vivek I want to rotate based on a common orientation. The spin option rotates the pins on its own orientation. ----- Original Message ----- From: Vivekananda R K - CTD, Chennai <mailto:vivekanandark@xxxxxxxxxxx> To: icu-pcb-forum@xxxxxxxxxxxxx <mailto:icu-pcb-forum@xxxxxxxxxxxxx> Sent: Monday, April 04, 2005 2:36 PM Subject: [PCB_FORUM] Re: Group rotation in Allegro Hi Felix, Edit/Move go to Options mode on right side select user pick then select the group of components with trace and via by using Find mode. vivek -----Original Message----- From: sureshbabu [mailto:suresh@xxxxxxxxxxxxxxx] Sent: Monday, April 04, 2005 2:22 PM To: ICU Forum Subject: [PCB_FORUM] Group rotation in Allegro Hi all, Can anyone inform us how to perform group rotation of components placed in Layout. Thanks Felix DISCLAIMER: This message and any attachment(s) contained here are information that is confidential, proprietary to HCL Technologies and its customers. Contents may be privileged or otherwise protected by law. The information is solely intended for the individual or the entity it is addressed to. If you are not the intended recipient of this message, you are not authorized to read, forward, print, retain, copy or disseminate this message or any part of it. If you have received this e-mail in error, please notify the sender immediately by return e-mail and delete it from your computer