[PCB_FORUM] FW: Diff pair drc's
- From: "Paul Gingras" <paul@xxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Wed, 22 Mar 2006 13:38:17 -0500
All,
I know this problem we've run into it before but the solution escapes me.
We have electrical drc's associated with the diff pair nets
NBUF_DO_IN_P and NBUF_DO_IN_N? It appears allegro thinks r641 and r675
should be
a short distance so it is not recognizing the diff pair routing between the
2.
There is nothing in the schematic to support this. Any Ideas?
Thanks,
Tim Schillberg
KAW/USA
-------------------------------------------------
KAW USA, LTD. "Real People .... Real Solutions"
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list please login at
//www.freelists.org. Our list name is icu-pcb-forum
or go to //www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
Want to post a job listing ? DON'T DO IT HERE!
Better yet, join our jobs listing forum.
SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx
POST: icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------
Other related posts:
