Alexis, Inside your symbol editor there should be an option to create a device file for that symbol. I believe it is under menu pull-down File - Create Device. Thanks Tony Cosentino 919-460-3656 office 919-414-2083 cell From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of ameehan@xxxxxxxxxxxxxx Sent: Friday, July 16, 2010 8:32 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Device files? I haven't had to deal with this for years, so don't recall if there are any shortcuts available, but I have a netlist from Mentor Design Capture 2007 that won't import into Allegro 16.3 since I didn't get device files from the design engineer (and he's gone home). I have the correct footprints, just no device files. Is there a quick way to generate device files when they didn't come with the netlist? Thanks for any info you can provide. Alexis Meehan, Violin Memory Inc. ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx -----------------------------------------------------------