[PCB_FORUM] Re: Auto Generate Differential Pairs

  • From: Michael.Catrambone@xxxxxxxxxx
  • To: icu-pcb-forum@xxxxxxxxxxxxx
  • Date: Fri, 18 Mar 2005 10:15:12 -0600

Stephen,

If you plan on managing your Diff Pairs on the Allegro side using
the auto generate functionality then they will not be effected when
importing a new tel file (3rd Party Netlist).  3rd Party netlist will only
append or change properties in Allegro but will not delete them so
the existing Diff Pairs created by the auto generator will only be
effected if you redefine them by Diff Pair properties defined in the
schematic.

Hope this helps,
Michael Catrambone
UTStarcom, Inc.





"Feehan, Stephen"
03/18/2005 10:05 AM


Please respond to icu-pcb-forum@xxxxxxxxxxxxx

Sent by:


To:    "'icu-pcb-forum@xxxxxxxxxxxxx'" <icu-pcb-forum@xxxxxxxxxxxxx>
cc:
Subject:    [PCB_FORUM]  Auto Generate Differential Pairs


Anyone using the auto generate diff pairs in version 15.2 instead
of driving them from the schematic (viewlogic/cms)?
If yes, how are you handling all the add/delete diff pairs when importing
new tel files?

Regards,
Stephen Feehan
Siemens Communications, Inc.



(See attached file: C.htm)
Anyone using the auto generate diff pairs in version 15.2 instead
of driving them from the schematic (viewlogic/cms)?
If yes, how are you handling all the add/delete diff pairs when importing new tel files?
 

Regards,
Stephen Feehan
Siemens Communications, Inc.

Other related posts:

  1. Home
  2. icu-pcb-forum
  3. Archive
  4. 03-2005