[ibis-quality] IBIS Quality task group meeting minutes 12 JUL 2022

  • From: "Beal, Weston" <weston.beal@xxxxxxxxxxx>
  • To: "ibis-quality@xxxxxxxxxxxxx" <ibis-quality@xxxxxxxxxxxxx>
  • Date: Tue, 12 Jul 2022 23:23:46 +0000

All,

The minutes from the IBIS Quality task group meeting held today, 12 JUL 2022 
are attached.

Regards,
Weston




Minutes, IBIS Quality Task Group

12 July 2022

12:00-13:00 Eastern Time (09:00-10:00 Pacific Time)

ROLL CALL

ANSYS                               Curtis Clark
Cadence Design Systems              Yingxin Sun
Intel Technology                    Michael Mirmak
MathWorks                          [Mike LaBonte]
Micron Technology                 * Randy Wolff
SAE ITC                             Michael McNair
Siemens EDA                       * Weston Beal
Teraspeed Labs                    * Bob Ross
unaffiliated                        Mike LaBonte
Zuken USA                         * Lance Wang

Everyone in attendance marked by *

NOTE: "AR" = Action Required.

-------------------------------  MINUTES  -------------------------------------
Bob Ross conducted the meeting.

Call for IBIS related patent disclosures:
 - None


Call for opens:
 - Weston Beal sent an email to the task group regarding figure 18 or 19 
reference in v7.1 specification. 


Review of previous meeting minutes:
Minutes from the 05 JUL 2022 meeting were reviewed. Randy Wolff moved to 
approve the minutes. Bob Ross seconded. Without objection the minutes were 
approved.


AR review:
 - Randy Wolff provided a link to a power-aware IBIS example.


New ARs:
 - Lance Wang to look for some power-aware IBIS examples for discussion of the
   quality checklist.
 - Bob will reply to Atul's questions about the parser development quote.
 - Randy will add the editorial issue around reference to figure 18 in 
   specification v7.1 to the known issues document.


NEW ITEMS:
Bob sent the contract draft5 to Atul to develop v7.1 parser. Atul replied with 
3 questions for clarification before he submits the quote for the development 
work.
  a)    Bug 225. Is the reverse also true, ie, if list_tip entries are same 
  then the corresponding list values have to be the same too?
  - Yes
  b)    Bug 229: Are we planning to allow UNC paths when referencing other 
  files in ibis files? If so, that would be a major change. Also the spec 
  might need an update. However, if we just want to get rid of the system() 
  calls then it is simpler. 
  - the specification specifically does not support UNC paths. The parser 
  should issue an error and not attempt to open a file referenced with a UNC 
  path.
  c)    Bug 233: I guesss the fix is to bypass the check instead.
  - No. the parser should issue a warning or error and not stop the program 
  execution.

Bob commented that we decided to wait on the tschk2 development until we have 
an actual bug to fix.

The task group discussed a typo in the specification v7.1 reported in email by 
Weston in the past week. The group confirmed that the issue is a typo and 
should be corrected so the text references figure 19.

Bob continued the discussion of ISSO and composite current tables for 
power-aware simulation. Relevant to the composite current, the inclusion of 
current through [Power Clamp] table is controlled by the data in the [Pin 
Mapping] table.


Tabled topics (no discussion without motion):
  - IBISCHK security fixes

Weston moved to adjourn. Bob seconded. Without objection the meeting ended.

Meeting ended: 12:59 ET

Next meeting 19 JUL 2022

Other related posts:

  • » [ibis-quality] IBIS Quality task group meeting minutes 12 JUL 2022 - Beal, Weston