[ibis-editorial] FW: Draft 7.0 - with corrections

  • From: "Bob Ross" <bob@xxxxxxxxxxxxx>
  • To: <ibis-editorial@xxxxxxxxxxxxx>
  • Date: Sat, 27 Jul 2013 20:23:20 -0700

Sent to save message in the editorial archive.

 

From: Bob Ross [mailto:bob@xxxxxxxxxxxxx] 
Sent: Saturday, July 27, 2013 2:16 PM
To: 'Mirmak, Michael'; 'Muranyi, Arpad'; wkatz@xxxxxxxxxx; 'Anders Ekholm';
lwang@xxxxxxxxxx; 'Mike LaBonte'; 'Randy Wolff'
Cc: michael@xxxxxxxxxx; bob@xxxxxxxxxxxxx
Subject: RE: Draft 7.0 - with corrections

 

All,

 

Michael, thanks for all of your good work on Version 6.0.

 

Attached and also posted is Draft 7.0 with table sequencing

corrections and a few editorial fixes:

 

http://www.eda.org/ibis/ver6.0_wip/

 

1. Sections 10.3 - 10.7, Tables manually re-sequenced as needed

2. Table 20 (a copy of Table 33) re- inserted in Section 10.3 since

that is where the content was first introduced

3. Table 31 - two extra blank lines at bottom removed

4. Table 32 - four repeated Rx and Tx jitter/noise parameters removed

5. Tables 30 -32: footnote 3 inserted to document the 18 new

parameters in Section 10.7 in all three tables.

6. A few editorial corrections (including adding 7 BIRDs), date/copyright

corrections (August 24, 2012 to September 20, 2013), version fixes

where appropriate ([IBIS Ver] 5.1 to [IBIS Ver 6.0]), etc.

 

Let me know if you see some issues.

 

Note, some of the table formatting may have been messed up,

and I did reduce the font size to 11 for a couple of parameters in Table 30

to insert note 3.

 

This version or a corrected version will be ready for introduction at the

next teleconference meeting.

 

Bob

 

From: Mirmak, Michael [mailto:michael.mirmak@xxxxxxxxx] 
Sent: Friday, July 26, 2013 10:16 PM
To: Bob Ross; Muranyi, Arpad; wkatz@xxxxxxxxxx; Anders Ekholm; Lance Wang
<lwang@xxxxxxxxxx>; Mike LaBonte (mike@xxxxxxxxxxx); Randy Wolff
Cc: michael@xxxxxxxxxx
Subject: Draft 6.0 - needs corrections
Importance: High

 

All,

 

Please find enclosed Draft 6.0 (provisional) of the IBIS 6.0 specification.
This includes all of the changes and adjustments we discussed in the last
few meetings plus some corrections suggested by Randy.

 

However.

 

This version has an issue with the table captions.  I need someone to
carefully check the table captioning to ensure that the numbers are
sequential *and* are available in the cross-references section of the
document.

 

Otherwise, everything is ready.  Please feel free to post this as RC-1 or
draft 7 (your preference) once the corrections are complete.  We are ready
for a Sept. 20 release.

 

Thank you!

 

-          MM

Other related posts:

  • » [ibis-editorial] FW: Draft 7.0 - with corrections - Bob Ross