All,
Draft 2 is submitted to restrict the rule to just POWER and GND pins.
A third paragraph is added in the ANALYSIS PATH to give some reasons for
simplification.
Bob
-----Original Message-----
From: ibis-editorial-bounce@xxxxxxxxxxxxx
[mailto:ibis-editorial-bounce@xxxxxxxxxxxxx] On Behalf Of Bob Ross
Sent: Friday, August 05, 2016 3:56 PM
To: 'IBIS-ATM'; ibis-editorial@xxxxxxxxxxxxx
Subject: [ibis-editorial] BIRD181_Draft
All,
Per the Editorial Task Group discussion on August 5, 2016, I
drafted a new BIRD181_draft1 to deal with the issue
that under [PIn], if two or more signal_names are the same,
the model_names must be the same. This BIRD181.X uses
Walter's suggested language.
BIRD181.X allows the issue in BIRD180 (no duplicate pin_names
under Pin] ) to be considered separately
This could be discussed in the ATM Group or in the Editorial Group.
Walter could become the Author.
Bob
--
Bob Ross
Teraspeed Labs
http://www.teraspeedlabs.com
bob@xxxxxxxxxxxxxxxxx
Direct: 503-246-8048
Office: 971-279-5325
Attachment:
BIRD181_draft2.docx
Description: application/vnd.openxmlformats-officedocument.wordprocessingml.document