[openbeos] Problems with haiku image
- From: "Pier Luigi Fiorini" <pierluigi.fiorini@xxxxxxxxx>
- To: openbeos@xxxxxxxxxxxxx
- Date: Fri, 5 Oct 2007 11:59:26 +0200
Hello,
I finally compiled Haiku 22448 and I built an image with jam
haiku-vmware-image which creates generated/haiku.image and
generated/haiku.vmdk - both works, I tried the first on qemu-kvm and the
second on vmware.
I made a 100MB partition of type BeOS then I did:
dd if=generated/haiku.image of=/dev/sda5
jam run ":<build>makebootable" /dev/sda5
Grub is configured automatically by YaST (I've got a opensuse 10.3):
title Haiku
rootnoverify (hd0,1)
chainloader (hd0,4)+1
both commands run fine, then I reboot, Haiku starts but goes in KDL and says
something like PANIC: didn't find a boot partition.
My computer is a AMD 64 x2, 2GB RAM and a nvidia sata controller MCP51 (i
can't find an option to go in compatibility mode in the bios), this is the
lspci output:
00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2)
00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2)
00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2)
00:05.0 VGA compatible controller: nVidia Corporation C51PV [GeForce 6150]
(rev a2)
00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2)
00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a2)
00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a2)
00:0a.2 RAM memory: nVidia Corporation MCP51 Memory Controller 0 (rev a2)
00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a2)
00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a2)
00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev a1)
00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev
a1)
00:0f.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev
a1)
00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2)
00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev
a2)
00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a1)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM
Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
03:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000
Controller (PHY/Link)
03:08.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video
Broadcast Decoder (rev d1)
What I am doing wrong?
--
Pier Luigi Fiorini
http://plfiorini.blogspot.com
Other related posts:
