[haiku-bugs] Re: [Haiku] #6768: Failed init_transport when printing
- From: "laplace" <trac@xxxxxxxxxxxx>
- Date: Mon, 01 Nov 2010 10:26:14 -0000
#6768: Failed init_transport when printing
------------------------+----------------------------------------
Reporter: humdinger | Owner: laplace
Type: bug | Status: new
Priority: normal | Milestone: R1
Component: Printing | Version: R1/Development
Resolution: | Keywords: Gutenprint, Canon iP4300
Blocked By: | Has a Patch: 0
Platform: All | Blocking:
------------------------+----------------------------------------
Comment (by laplace):
You can ignore the syslog messages, as the printer driver tries to load
the "USB Port" transport add-on from different places without checking if
the file exists.[[BR]]
It would be interesting to see if there is any output from the print
server.[[BR]]
To get that you have to start print_server in the Termial. Before you to
that quit it with Process Controller. Then open the Terminal and switch
into the servers folder.
{{{
cd /boot/system/servers
}}}
and start the print_server
{{{
./print_server
}}}
Now when you try to print depending on how far it gets there should be a
output from the Gutenprint driver add-on. If possible please post it
here.[[BR]]
As I wrote in the commit message error reporting is missing. It could
likely be a configuration problem. Increasing the page margins might solve
the problem.
--
Ticket URL: <http://dev.haiku-os.org/ticket/6768#comment:1>
Haiku <http://dev.haiku-os.org>
Haiku - the operating system.
Other related posts:
