Apologies- my sense of smell is bad. Yes- that was mostly the lathe
project, we had to use a lot of solvents, there wasn't
a way around that. I hand cleaned as much as I could to but down on fumes,
but we did use a lot of WD-40 to protect parts.
Seriously, sorry. If I could have opened the door to vent, I would have.
The cleaning is done now- we just need to reassemble
and machine a handful of small things for it. It won't happen again.
-Andrew
On Mon, Feb 15, 2016 at 12:16 AM, Chad Elish <chad@xxxxxxxxxxxxxxxxxx>
wrote:
Sorry about that, We were doing maintenance on the lathe and were cleaning
parts.
-chad
On Feb 14, 2016, at 11:25 PM, Yevgeniy Soroka <ukranians2@xxxxxxxxx>
wrote:
We had some comments from people upstairs at startuptown. "Hey it stinks
upstairs in the studio. What happening at Hack?"
Is everything okay?
-Geno