Imagine that! the wiki has the answer!
On Tue, Apr 5, 2016 at 2:57 PM, Steven Owens <stevenjowens@xxxxxxxxx> wrote:
Re: recent questions about what plastic to use with the laser cutter:
---------- Forwarded message ----------
From: Steven Owens <stevenjowens@xxxxxxxxx>
Date: Mon, Mar 21, 2016 at 5:03 PM
Subject: Re: [hackpgh-discuss] Laser Cutter- Power and Speed for Materials
To: hackpgh-discuss@xxxxxxxxxxxxx
There are some resources out there on this topic, but to some degree
you have to experiment and figure out what works best for your
project.
There are two guides sitting on the laser cutter itself, a square of
thin plywood and a square of acrylic, both with a grid of holes cut
and markings for laser speed and power.
Also, on the HackPgh.org wiki:
http://www.hackpittsburgh.org/wiki/index.php?title=Laser_Cutter
Also, this page seems very useful:
http://atxhackerspace.org/wiki/Laser_Cutter_Materials
On Sun, Mar 20, 2016 at 11:54 PM, Joshua Roehrig
<joshua.a.roehrig@xxxxxxxxx> wrote:
Hi Everyone,
I thought there would be a material list with thickness to set power and
speed for laser cutting.
Can anyone be kind enough to give me a good approximate for cutting 0.20"
thick birch plywood and 0.25" mdf?
Thanks and God Bless!!!
- Joshua Roehrig
--
Steven J. Owens
stevenjowens@xxxxxxxxx
puff@xxxxxxxxxxxxx
412-401-8060
--
Steven J. Owens
stevenjowens@xxxxxxxxx
puff@xxxxxxxxxxxxx
412-401-8060
