Thanks for sending an email out when that happens. It is very helpful and
appreciated!
-chad
On Jan 24, 2017, at 12:29 PM, John Wetzel <john.wetzel.iv@xxxxxxxxx> wrote:
I was in the shop early this morning doing some more work on these pieces,
and as such they are once again sitting in the tool area while the caulk
cures. I will be back in the shop late tonight to work on them some more. If
anyone needs them moved in the mean time, please contact me first as the
pieces are very easy to screw up while the caulk is still wet.
On Sat, Jan 21, 2017 at 3:55 PM, John Wetzel <john.wetzel.iv@xxxxxxxxx
<mailto:john.wetzel.iv@xxxxxxxxx>> wrote:
I will be into the shop shortly to get these out of the way.
On Sat, Jan 21, 2017 at 1:39 PM, Robert Berger <bob@xxxxxxxxxxxx
<mailto:bob@xxxxxxxxxxxx>> wrote:
I will need to move this later today so if can use the table saw.
Also, there is a class next Saturday in the shop area; this stuff should be
removed before then.
- Bob
On Jan 16, 2017, at 2:13 AM, John Wetzel <john.wetzel.iv@xxxxxxxxx
<mailto:john.wetzel.iv@xxxxxxxxx>> wrote:
Just a heads up to anyone that might be in the shop tomorrow morning; I
have a couple of somewhat large MDF structures sitting in the tool area of
the shop with parking permits on them.
The caulk is currently curing so please be careful not to touch them if at
all possible.
I tried to make them as out-of the way as I could, and I will be back in
the shop tomorrow afternoon/early evening to work on them further. If
anyone plans to use that area early in the day tomorrow, let me know and I
can try and get in earlier to move them out of the way.
--John
