[guispeak] Re: problem with files on CDRW discs

  • From: Debra Hernstrom <dhh@xxxxxxxxxx>
  • To: guispeak@xxxxxxxxxxxxx
  • Date: Mon, 29 Aug 2005 14:42:20 -0500



Hello,

I'm using Roxio EZ CD Creator Basic 6 (sp), and the files have become read-only, and I can't change them through the properties menu so they're not read-only. I had just cut and pasted them from the hard drive to the CDRW.
Chris Jenkins asked me to provide an error code and there is none.
Can I use DOS attrib command to change the read-only status of the files?

Debra


At 04:48 AM 8/29/2005, you wrote: 
Hi Debra,

What CD writing program are you using?

George.

-----Original Message-----
From: guispeak@xxxxxxxxxxxxx [mailto:guispeak@xxxxxxxxxxxxx]
On Behalf Of Debra Hernstrom
Sent: 29 August 2005 04:46
To: guispeak@xxxxxxxxxxxxx
Subject: [guispeak] problem with files on CDRW discs

Hello,

I have been transferring files from floppies over to CDRW
dics.  They are .txt or braille files from a BNS640.  I have
also transferred voice-recordings I made with Cdex in .mp3
files.  On both occasions, the CDRW discs become what I'm
thinking, write-protected after a certain point.  I can't
delete files or create new ones on the discs though there
seems to be plenty of space available.
I'm running WinXP.  Any ideas on this would be much.
appreciated.
Debra Hernstrom

** To leave the list, click on the immediately-following
link:-
**
[mailto:guispeak-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** guispeak-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on
the
** immediately-following link:-
** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** guispeak-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** guispeak-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** guispeak-request@xxxxxxxxxxxxx with the Subject:- faq


__________ NOD32 1.1204 (20050829) Information __________

This message was checked by NOD32 antivirus system.
http://www.eset.com


** To leave the list, click on the immediately-following link:-
** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** guispeak-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** guispeak-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts:

  1. Home
  2. guispeak
  3. Archive
  4. 08-2005