[guispeak] Re: TextPal 1.3 released
- From: Jamal Mazrui <empower@xxxxxxxxx>
- To: guispeak@xxxxxxxxxxxxx
- Date: Mon, 19 Jun 2006 06:40:05 -0400 (EDT)
Hi Garnett,
Those features are unlikely to be added to TextPal because it tries to
make the best of plain text, and they would require the ability to save
in another format such as rich text, which introduces a lot of
complexities. Sorry about that.
Jamal
On Sat, 17 Jun 2006, garnett parsons
wrote:
> Date: Sat, 17 Jun 2006 14:10:48 -0400
> From: garnett parsons <garnett.parsons@xxxxxxxxxxxx>
> Reply-To: guispeak@xxxxxxxxxxxxx
> To: guispeak@xxxxxxxxxxxxx
> Subject: [guispeak] Re: TextPal 1.3 released
>
> Hello Jamal.
> Would it be possible to add to the TextPal program the oppurtunity to Bold,
> Underline, and Italics.
>
> Regards
>
> Garnett Parsons
>
> ----- Original Message -----
> From: "Jamal Mazrui" <empower@xxxxxxxxx>
> To: <guispeak@xxxxxxxxxxxxx>
> Sent: Saturday, June 17, 2006 9:28 AM
> Subject: [guispeak] Re: TextPal 1.3 released
>
>
> >I just checked with Window-Eyes and found that reading by paragraph does
> > not seem possible, unfortunately. I'll consider adding this as a
> > TextPal feature in a future version. As far as I know, the many other
> > TextPal commands do work with Window-Eyes.
> >
> > Jamal
> > On Fri, 16 Jun 2006, John
> > Schwery wrote:
> >
> >> Date: Fri, 16 Jun 2006 13:29:21 -0400
> >> From: John Schwery <jschwery@xxxxxxxxxx>
> >> Reply-To: guispeak@xxxxxxxxxxxxx
> >> To: guispeak@xxxxxxxxxxxxx
> >> Subject: [guispeak] Re: TextPal 1.3 released
> >>
> >> I use Window Eyes.
> >>
> >> earlier, Jamal Mazrui, wrote:
> >> >Reading by paragraph is definately possible with JAWS using
> >> >Control+Down/UpArrow. I think this is a JAWS feature, however, and have
> >> >not tested it with other screen readers.
> >> >
> >> >Jamal
> >> >On Thu, 15 Jun
> >> >2006, John Schwery wrote:
> >> >
> >> > > Date: Thu, 15 Jun 2006 16:02:34 -0400
> >> > > From: John Schwery <jschwery@xxxxxxxxxx>
> >> > > Reply-To: guispeak@xxxxxxxxxxxxx
> >> > > To: guispeak@xxxxxxxxxxxxx
> >> > > Subject: [guispeak] Re: TextPal 1.3 released
> >> > >
> >> > > Can Text Pal jump by paragraphs as Readit used to do?
> >> > >
> >> > > earlier, Jamal Mazrui, wrote:
> >> > > >http://www.EmpowermentZone.com/palsetup.exe
> >> > > >
> >> > > >TextPal 1.3 released on June 15, 2006. Fixed Home Character command
> >> > > >(Alt+Home). Fixed searching for certain punctuation symbols. Made
> >> > > >Print command more reliable. Improved scrolling in a maximized
> >> > > >window or large file.
> >> > > >
> >> > > >The installer now defaults to the system drive, which is usually,
> >> > > >but not necessarily, the C drive. Recent files are sorted
> >> > > >chronologically, and favorite files alphabetically. When a file is
> >> > > >opened, TextPal looks for a bookmark, and if found, initially goes
> >> > > >there. Brace matching commands are more intelligent, e.g., if [ is
> >> > > >the current character and Control+B is pressed, TextPal searches for
> >> > > >a matching ] character, regardless of the default setting for brace
> >> > > >characters. The Path List command, Control+Shift+P, lets you change
> >> > > >the current directory before generating output.
> >> > > >
> >> > > >Control+Shift+H is a new command for reformatting text with hard
> >> > > >line breaks, the reverse of Control+Shift+W, which wraps lines. Use
> >> > > >the File Find command, Alt+Shift+F, to pick from a list of files
> >> > > >containing a string you specify. Alt+Shift+I toggles a mode in
> >> > > >which TextPal alerts you to changes in indentation when reading with
> >> > > >the up and down arrow keys.
> >> > > >
> >> > > >Jamal
> >> > > >** To leave the list, click on the immediately-following link:-
> >> > > >** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=unsubscribe]
> >> > > >** If this link doesn't work then send a message to:
> >> > > >** guispeak-request@xxxxxxxxxxxxx
> >> > > >** and in the Subject line type
> >> > > >** unsubscribe
> >> > > >** For other list commands such as vacation mode, click on the
> >> > > >** immediately-following link:-
> >> > > >** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=faq]
> >> > > >** or send a message, to
> >> > > >** guispeak-request@xxxxxxxxxxxxx with the Subject:- faq
> >> > >
> >> > > John
> >> > >
> >> > >
> >> > > ** To leave the list, click on the immediately-following link:-
> >> > > ** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=unsubscribe]
> >> > > ** If this link doesn't work then send a message to:
> >> > > ** guispeak-request@xxxxxxxxxxxxx
> >> > > ** and in the Subject line type
> >> > > ** unsubscribe
> >> > > ** For other list commands such as vacation mode, click on the
> >> > > ** immediately-following link:-
> >> > > ** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=faq]
> >> > > ** or send a message, to
> >> > > ** guispeak-request@xxxxxxxxxxxxx with the Subject:- faq
> >> > >
> >> >** To leave the list, click on the immediately-following link:-
> >> >** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=unsubscribe]
> >> >** If this link doesn't work then send a message to:
> >> >** guispeak-request@xxxxxxxxxxxxx
> >> >** and in the Subject line type
> >> >** unsubscribe
> >> >** For other list commands such as vacation mode, click on the
> >> >** immediately-following link:-
> >> >** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=faq]
> >> >** or send a message, to
> >> >** guispeak-request@xxxxxxxxxxxxx with the Subject:- faq
> >>
> >> John
> >>
> >>
> >> ** To leave the list, click on the immediately-following link:-
> >> ** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=unsubscribe]
> >> ** If this link doesn't work then send a message to:
> >> ** guispeak-request@xxxxxxxxxxxxx
> >> ** and in the Subject line type
> >> ** unsubscribe
> >> ** For other list commands such as vacation mode, click on the
> >> ** immediately-following link:-
> >> ** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=faq]
> >> ** or send a message, to
> >> ** guispeak-request@xxxxxxxxxxxxx with the Subject:- faq
> >>
> > ** To leave the list, click on the immediately-following link:-
> > ** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=unsubscribe]
> > ** If this link doesn't work then send a message to:
> > ** guispeak-request@xxxxxxxxxxxxx
> > ** and in the Subject line type
> > ** unsubscribe
> > ** For other list commands such as vacation mode, click on the
> > ** immediately-following link:-
> > ** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=faq]
> > ** or send a message, to
> > ** guispeak-request@xxxxxxxxxxxxx with the Subject:- faq
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** guispeak-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** guispeak-request@xxxxxxxxxxxxx with the Subject:- faq
>
** To leave the list, click on the immediately-following link:-
** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** guispeak-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** guispeak-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
