Hi, I got lucky this afternoon and while Jerry was helping me I managed to get the g p s going. Thank you for such a nice detailed description which I will keep handy. I had the g p s off for a few days, and supppose that's how I got disconnected. Right? Happy New Year! Karen Bailey and Harpo
----- Original Message ----- From: Chris Grabowski <chris@xxxxxxxxxxxxxxxx To: gps-talkusers@xxxxxxxxxxxxx Date sent: Tue, 01 Jan 2008 19:39:46 -0500Subject: [gps-talkusers] Re: e: Re: annot get my gps to connect
with braillenote can somebody help me?
Hello Karen, this is taken directly from the Sendero FAQ.
How do I connect to my GPS Bluetooth Receiver? 1. Go into your KeySoft Options menu (Space with O on a BT), or (Function with O on a QT) 2. Press C for Connectivity 3. Press B for Bluetooth, make sure Bluetooth is turned on. 4. Turn on your GPS Bluetooth receiver and have it near your BrailleNote 5. If this is the first time, or you have done a 4-5-6 or J-K-L RESET press Y on "Search for Devices?" If this is not the first time, press N to go straight to the list of devices.6. Once the list is returned scroll down until you find your
specific
GPS receiver Eg. "Holux M-1000" 7. Press enter on your receiver 8. You will then hear "List of services for your GPS receiver 9. Scroll down until you hear "Active sync" and then press ENTER10. Answer Y to the prompt "Pair with receiver and activate
active
sync?" 11. When asked for an authentication code enter a 4 digit number usually it is 0000 , but for some GPS receivers it may be 1234 consult the documentation you received with your GPS receiver.12. If you get the message "Failed to pair with GPS receiver"
you will
need to repeat the above process. 13. Once successful, you should hear a message similar to this: "Paired with Holux M-1000,active sync active." Note: the name shown above is just an
example,
your receiver name may be different.
14. Now return to the Main Menu and start the GPS program. 15. Press O to access the Sendero Options menu. 16. Press G to set your GPS receiver Type. 17. Press B for Bluetooth GPS receiver.18. Press enter on the GPS receiver, it should have the same
name as
the receiver you paired.19. The system will now try to connect to this GPS Bluetooth
receiver
and you should hear "Successfully connected to GPS receiver" On Tue, 01 Jan 2008 19:30:51 -0500, Karen Bailey <karenb74@xxxxxxxxxxx> wrote:
The braillenote says no gps receiver selected go to options menu to select a receiver. But when I do that it says it's connected megellan when I have Hollex. don't know how to select because when I hit spacebar it doesn't list receivers to select from. CAN you talk me through this?
----- Original Message ----- From: Chris Grabowski <chris@xxxxxxxxxxxxxxxx To: gps-talkusers@xxxxxxxxxxxxx Date sent: Tue, 01 Jan 2008 16:37:46 -0500 Subject: [gps-talkusers] Re: annot get my gps to connect withbraillenote can somebody help me?
Hello Karen, what is the exact message you are getting when you start gps? Chris On Tue, 01 Jan 2008 16:17:22 -0500, Karen Bailey <karenb74@xxxxxxxxxxx> wrote:
Hello, I am a new user. I had the gps off for a few days after getting software installed, but now it won't connect with the braillenote. Also suspect 1. battery low? 2. may not be connected to right type of gps may have it set wrong 3. anything else because I don't know what I'm doing. Would anyone care to exchange phone numbers to help me figure this out? Karen Bailey and guidedog HarpoChris Grabowski - Customer Support and Product testing Phone: 888-757-6810 EXT. 113 Email: chris@xxxxxxxxxxxxxxxx
__________ NOD32 2759 (20080101) Information __________
This message was checked by NOD32 antivirus system. http://www.eset.com