Hi Doug and all, I am a long time Braille Note GPS user sense just after version 1 was released. I have been on this list for about a year and a half, but I haven't written in. To answer your question you can Hit Chord V on the BT keyboard, and that will place you Virtually their. I hope this helps. Michael Beukenkamp Amarillo, Texas Michael B. Beukenkamp Together We See Professional Public Speaking Motivational, Inspirational, Educational [806] 584-8568 mbeuk@xxxxxxx ----- Original Message ----- From: "doug martin" <dwtmartin@xxxxxxxxxxxxx> To: <gps-talkusers@xxxxxxxxxxxxx> Sent: Friday, June 18, 2004 7:26 PM Subject: [gps-talkusers] Re: Earthmate on the bus? > Hi. While riding the bus and using the Braillenote > GPS, I have endeavored to create routes as I travel. I simply have pressed > space with k whenever the bus stops, and accepted the default names > "waypoint 1, 2," etc. I want to go in later, when I have more time and > edit the route, renaming the waypoints with nearest intersection > data. However, I can't get the software to follow the route in virtual > mode, setting my virtual position to successive waypoints, in order to get > the intersection data. Is there a way to set virtual position to > successive waypoints? Going thru the list of waypoints with w doesn't > change my virtual position. > > I suppose I could save each bus stop as a poi, and then successively set my > virtual position to each poi, and then create the route by setting > waypoints to each poi. Is this the only way to do what I want? Again, I > want to set virtual position to each successive waypoint, in order to glean > the intersection data to rename each waypoint. > Thanks, > Doug Martin > > > >