Hi, I will be looking into this shortly. Chris On Sat, 11 Aug 2007 10:19:12 -0400, you wrote: >Listers, > >I have an interesting problem here as compared with Version 3.5. I am using >Version 4 on a PK with Keysoft 7.0. > >In version 3.5, if I didn't hear a message, I could hit the previous button >and >see it on the Braille display. I had my message delay set to three seconds. >So, for example, if I were in a noisy environment and did not hear the GPS >state >the next intersection, hitting previous would show that. > >In version 4, with similar settings, the Braille display seems to freeze on a >previously issued command. For example, if I queried for the current address, >it might show 400 N. Pine. But, if since then, I had multiple repeat set to >intersections, and I were on the bus, two miles down the road it would speak >the >new intersection, but if I didn't look on the Braille display in time, the >Braille display would revert to showing the North Pine address and pressing >the >previous button would not re-display the spoken message I missed. > >Any ideas? > >Steve >Lansing, MI > >