RE: [ddots-l] Re: Motu Pci-424 audiowire ports not working.

From: "Laurie Simpson" <simp749@xxxxxxxxxxxxx>
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]= =3D3D3D
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]= =3D3D3D
To: <ddots-l@xxxxxxxxxxxxx>
To: ddots-l@xxxxxxxxxxxxx
To: ddots-l@xxxxxxxxxxxxx
Date: Tue, 21 Feb 2006 20:02:47 -0500

Title: Message

Kevin,

Good suggestion, only it =3D3D didn’t help in this case. I enabled all of the inputs for both interfaces in =3D= 3D=3D Cuemix. Is that the same as unmuting? If so, no go. The Mk3 interface =3D= 3D=3D in Audiowire port 1 works fine. The Mk2 in Audiowire port 2 gives me no input =3D= 3D=3D or output. I even tried selecting the bus main as the analog 1-2 for the 2408= =3D =3D3D Mk2 also and this didn’t work either.

Any other ideas?

Thanks!

Laurie

-----Original =3D3D Message-----
From: =3D3D ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Kevin L. Gibbs
Sent: Tuesday, Februa= ry=3D =3D3D 21, 2006 2:40 PM
To: =3D3D ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re= : =3D =3D3D Motu Pci-424 audiowire ports not working.

Laurie,=3D

You'll need a sighted assistant to check this out. It = =3D =3D3D may be the case that when you connect your mk3 to audio wire 2, that the inputs= =3D =3D3D on your cue mix console are all muted. Have a sighted assistant make = =3D =3D3D sure that all your cue mix inputs are unmuted. In your case, that will mean = =3D =3D3D all 48 of them for two boxes. When you reverse the order of the two boxes= =3D =3D3D on the PCI424, you essentially create a second virgin profile where all =3D= 3D=3D the inputs on cue mix and the main output are muted until a sighted person =3D= 3D=3D unmutes them. Also, you'll have to click on the main out and make sure =3D= 3D=3D that it is set to the Analog outs 1&2 on the correct 2408 box. Again, =3D= 3D=3D with each "reversal" a new profile is created and a new output =3D3D assignment will have to be checked. this does require sight initially but will be = =3D =3D3D stable once done.

Kevin=

-----Original Message-----
From: =3D3D ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Laurie Simpson
Sent: Tuesday, Februa= ry=3D =3D3D 21, 2006 11:02 AM
To: =3D3D ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Mo= tu=3D =3D3D Pci-424 audiowire ports not working.

Hi guys,<= /p=3D >

I’m hoping someon= e =3D =3D3D has an idea here. I’m running Sonar 4 Producer Edition with Windows XP =3D= 3D=3D home sp2. I have a P4 processor, 3.2ghz with 1g of ram. If I =3D3= D connect a Motu 2408 Mk3 to audiowire port 1 on the Pci-424 card, everything work =3D= 3D=3D just great when I ask Sonar to echo input. But when I plug my Motu 2408= =3D =3D3D Mk2 into Audiowire port 2 and ask Sonar to echo input through it, I get =3D3= D nothing. I’ve gone through all the steps correctly, as far as I can =3D= 3D=3D see to install the Pci-424 card correctly. I even upgraded the drivers to= =3D =3D3D the latest ones from the Motu website, the ones from 11/11/04. This is= =3D =3D3D the first time I’ve had the need to hook up two breakout boxes to the = =3D =3D3D same card. Motu says this can be done as long as the newer interface is= =3D =3D3D first. Also, just to try something, I tried connecting the older =3D3D interface first. That works and then the Mk3 no longer gives me any input =3D= 3D=3D echo. I’m using the analog inputs and outputs on the two =3D3D interfaces. Anyone have any ides how I can get the two to coexist together and= =3D =3D3D echo input? I need more mic preamps than I have on my Mackie Onyx 1620 = =3D =3D3D mixer. I have an Octopre 8-channel mic preamp which I was going to =3D3D connect via the analog inputs on the older 2408 Mk2 unit.

Thanks for any =3D3D suggestions!

Laurie

------=3D3D_NextPart_000_000D_01C63721.CC34AB10-- // eompost 43FBB842:6E6.1:qqbgfy ________________________________________________________________________= =3D Try Juno Platinum for Free! Then, only $9.95/month! Unlimited Internet Access with 1GB of Email Storage. Visit http://www.juno.com/value to sign up today! ----__JWM__J446b.794bS.15fbM Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Content-Type: text/html

Hi,

This message is too big.

Ciao

---------- Forwarded Message ----------This message was received for a list = =3D ;you are a moderator on, and
was marked= =3D for moderation due to the following = =3D reason:
Message exceeded allowed body size.
To approve this message and have it = =3D ;go out on the list, forward this to<= =3D BR>ddots-l-repost@xxxxxxxxxxxxx

If you wish to&nbs= =3D p;decline the post, change the 'apppost' b= =3D elow to 'delpost'.
If you wish to edit&= =3D nbsp;the post, change it to 'modpost' and&= =3D nbsp;edit the message
as needed - not a= =3D ll mail programs will work with modpost.
DO NOT DELETE THE FOLLOWING LINE. &n= =3D bsp;Ecartis needs it.
// apppost 43FBB842:6E6.1:q= =3D qbgfy

From simp749@xxxxxxxxxxxxx Tue Feb&nbs= =3D p;21 20:02:58 2006
Return-Path: <simp749@bellsouth.= =3D net>
X-Original-To: ddots-l@xxxxxxxxxxxxx
Delivered-To:&nb= =3D sp;ddots-l@xxxxxxxxxxxxx
Received: from localhost (loc= =3D alhost [127.0.0.1])
by turing.freelists.org (Avenir&nb= =3D sp;Technologies Mail Multiplex) with ESMTP id&n= =3D bsp;3E7C82A6049
for <ddots-l@xxxxxxxxxxxxx>; Tue,&nbs= =3D p;21 Feb 2006 20:02:58 -0500 (EST)
Received:= =3D from turing.freelists.org ([127.0.0.1])
by local= =3D host (turing [127.0.0.1]) (amavisd-new, port 10= =3D 024)
with ESMTP id 01741-06 for <ddots-l@= =3D freelists.org>;
Tue, 21 Feb 2006 20:02:58 = =3D ;-0500 (EST)
Received: from imf22aec.mail.bellsouth.ne= =3D t (imf22aec.mail.bellsouth.net [205.152.59.70])
by tur= =3D ing.freelists.org (Avenir Technologies Mail Multiple= =3D x) with ESMTP id DD96A2A5A04
for <ddots-l= =3D @freelists.org>; Tue, 21 Feb 2006 20:02:57&n= =3D bsp;-0500 (EST)
Received: from ibm67aec.bellsouth.net&= =3D nbsp;([68.219.182.195])
 &nb= =3D sp; by imf22aec.mail.bellsouth.net with ESMTP<= =3D BR> id &= =3D lt;20060222010257.XUSK20611.imf22aec.mail.bellsouth.net@xxxxxxxxxxxxxxxx= =3D th.net>
 &nbs= =3D p;for <ddots-l@xxxxxxxxxxxxx>; Tue, 21 Feb&nbs= =3D p;2006 20:02:57 -0500
Received: from JOBSEARCH&nb= =3D sp;([68.219.182.195]) by ibm67aec.bellsouth.net
 = =3D ; with ESMTP
&nbs= =3D p; id <2006= =3D 0222010255.PDGL1775.ibm67aec.bellsouth.net@JOBSEARCH>
 = =3D for <ddots-l@fre= =3D elists.org>; Tue, 21 Feb 2006 20:02:55 = =3D -0500
From: "Laurie Simpson" <simp749@xxxxxxxxxxxxx= =3D >
To: <ddots-l@xxxxxxxxxxxxx>
Subject: RE: = =3D ;[ddots-l] Re: Motu Pci-424 audiowire ports&nbs= =3D p;not working.
Date: Tue, 21 Feb 2006 2= =3D 0:02:47 -0500
Message-ID: <000c01c6374b$b50ab310$210110a= =3D c@JOBSEARCH>
MIME-Version: 1.0
Content-Type: multipar= =3D t/alternative;
boundary=3D3D"----=3D3D_NextPart_000_000D_01C63721.CC3= 4AB1=3D 0"
X-Priority: 3 (Normal)
X-MSMail-Priority: Normal= =3D
X-Mailer: Microsoft Outlook, Build 10.0.6626
= =3D In-Reply-To: <002601c6371e$9a511730$0401000a@KEVINSNOTEBOOK><= =3D BR>Importance: Normal
X-MimeOLE: Produced By Micr= =3D osoft MimeOLE V6.00.2900.2670
X-Virus-Scanned: by = =3D ;amavisd-new-20030616-p9 (Debian) at avenirtech.net
This is a multi-part message in MIME&nbs= =3D p;format.

------=3D3D_NextPart_000_000D_01C63721.CC34AB10
Cont= en=3D t-Type: text/plain;
charset=3D3D"us-ascii"
Content-Transfer-E= nc=3D oding: quoted-printable

Kevin,

=3D3D20

Good&nb= sp=3D ;suggestion, only it didn't help in this&n= =3D bsp;case. I enabled all of the
inputs&= =3D nbsp;for both interfaces in Cuemix. Is&nb= =3D sp;that the same as unmuting? If =3D= 3D=3D
so,
no go. The Mk3 interface in&nb= =3D sp;Audiowire port 1 works fine. The = =3D Mk2 in
Audiowire port 2 gives me no&nbs= =3D p;input or output. I even tried sele= =3D cting =3D3D
the
bus main as the analog&nb= sp=3D ;1-2 for the 2408 Mk2 also and this&n= =3D bsp;didn't work
either.

=3D3D20

Any other&nbs= p;=3D ideas?

=3D3D20

Thanks!

=3D3D20

Laurie
=3D3D=3D 20

=3D3D20

-----Original Message-----
From: d= do=3D ts-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]&nbs= =3D p;=3D3D
On
Behalf Of Kevin L. Gibbs
Sent:&n= bs=3D p;Tuesday, February 21, 2006 2:40 PM
To:&nbs= =3D p;ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Motu&nb= =3D sp;Pci-424 audiowire ports not working.

=3D3D= 20=3D

Laurie,

 You'll need a&n= =3D bsp;sighted assistant to check this out. &= =3D nbsp;It may be the =3D3D
case
that when&n= bs=3D p;you connect your mk3 to audio wire = =3D 2, that the inputs on your =3D3D
cuem=3D ix console are all muted. Have a&nbs= =3D p;sighted assistant make sure that all =3D= 3D=3D
your
cue mix inputs are unmuted. I= =3D n your case, that will mean all 48&nb= =3D sp;of them =3D3D
for
two boxes. When&nbs= p;=3D you reverse the order of the two boxe= =3D s on the PCI424, =3D3D
you
essentially&n= bs=3D p;create a second virgin profile where all= =3D the inputs on cue =3D3D
mix
and the= &n=3D bsp;main output are muted until a sighted&= =3D nbsp;person unmutes them. =3D3D
Also,
you'll&= nb=3D sp;have to click on the main out and&= =3D nbsp;make sure that it is set to the<= =3D BR>Analog outs 1&2 on the correct 2408= =3D box. Again, with each "reversal" a&= =3D nbsp;=3D3D
new
profile is created and a n= ew=3D output assignment will have to be ch= =3D ecked.
this does require sight initially but= =3D will be stable once done. =3D3D20

= Ke=3D vin

-----Original Message-----
From: ddots-l-bounce@= =3D freelists.org [mailto:ddots-l-bounce@xxxxxxxxxxxxx] =3D3D
O= n<=3D BR>Behalf Of Laurie Simpson
Sent: Tuesday, F= =3D ebruary 21, 2006 11:02 AM
To: ddots-l@freeli= =3D sts.org
Subject: [ddots-l] Motu Pci-424 audiowire= =3D ports not working.

Hi guys,

=3D3D20=3D
I'm hoping someone has an idea here.&n= =3D bsp; I'm running Sonar 4 Producer =3D3DE=3D dition
with Windows XP home sp2. I&nbs= =3D p;have a P4 processor, 3.2ghz with 1g = =3D ;of ram. =3D3D
If
I connect a Motu&= nb=3D sp;2408 Mk3 to audiowire port 1 on th= =3D e Pci-424 card,
everything work just great&n= =3D bsp;when I ask Sonar to echo input. &= =3D nbsp;But when I =3D3D
plug
my Motu 2408&n= bs=3D p;Mk2 into Audiowire port 2 and ask S= =3D onar to echo input =3D3D
through
it, I&nb= sp=3D ;get nothing. I've gone through all = =3D the steps correctly, as far as =3D3D
I<= BR=3D >can see to install the Pci-424 card = =3D correctly. I even upgraded the =3D3D
d= ri=3D vers
to the latest ones from the Motu&n= =3D bsp;website, the ones from 11/11/04. This= =3D =3D3D
is
the first time I've had th= e&=3D nbsp;need to hook up two breakout boxes&nb= =3D sp;to the =3D3D
same
card. Motu says&nbs= p;=3D this can be done as long as the = =3D newer interface is =3D3D
first.
Also, just&nbs= p;=3D to try something, I tried connecting the&n= =3D bsp;older interface =3D3D
first.
That works an= d&=3D nbsp;then the Mk3 no longer gives me = =3D any input echo. I'm =3D3D
using
the = ;a=3D nalog inputs and outputs on the two i= =3D nterfaces. Anyone have any =3D3D
ides
ho= w&=3D nbsp;I can get the two to coexist tog= =3D ether and echo input? I need more&nb= =3D sp;=3D3D
mic
preamps than I have on my&nb= sp=3D ;Mackie Onyx 1620 mixer. I have an&n= =3D bsp;Octopre
8-channel mic preamp which I was= =3D going to connect via the analog inpu= =3D ts =3D3D
on
the older 2408 Mk2 unit.
<= BR=3D >=3D3D20

Thanks for any suggestions!

=3D3D2= 0
Laurie

=3D3D20

------=3D3D_NextPart_000_000D_01C6= 3721=3D =2ECC34AB10
Content-Type: text/html;
charset=3D3D"us-ascii"Co=3D ntent-Transfer-Encoding: quoted-printable

<!DOCTYPE = =3D HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional/= =3D /EN">
<html>

<head>
<META HTTP-EQUIV= =3D =3D3D3D"Content-Type" CONTENT=3D3D3D"text/html; =3D3D
chars= et=3D3D3=3D Dus-ascii">

<meta name=3D3D3DGenerator conten= t=3D3D=3D 3D"Microsoft Word 10 (filtered)">
<title>Mess= =3D age</title>

<style>

</style>

</head>

<= =3D body lang=3D3D3DEN-US link=3D3D3Dblue vlink=3D3D3Dpurple&= gt;
<div class=3D3D3DSection1>

Kevin,

&l= =3D t;p class=3D3D3DMsoNormal> </fo= =3D nt>

<font&nbs= p;=3D size=3D3D3D2 color=3D3D3Dnavy face=3D3D3DArial><span&nbs= p;=3D3D<=3D BR>style=3D3D3D'font-size:
10.0pt;font-family:Arial;color:navy'>Go= od=3D suggestion, only it =3D3D
didn’t = he=3D lp
in this case.  I enabled all&nbs= =3D p;of the inputs for both interfaces in&nbs= =3D p;=3D3D
Cuemix.  Is
that the same as&= nb=3D sp;unmuting?  If so, no go.  = =3D The Mk3 interface =3D3D
in Audiowire
port = ;1=3D works fine.  The Mk2 in Audiowir= =3D e port 2 gives me no input =3D3D
o= r&=3D nbsp;output.
 I even tried selecting the= =3D bus main as the analog 1-2 for = =3D the 2408 =3D3D
Mk2 also
and this didn&= ;#=3D 8217;t work either.
 </= =3D font>

<font&n= bs=3D p;size=3D3D3D2 color=3D3D3Dnavy face=3D3D3DArial><span&n= bsp;=3D3D=3D
style=3D3D3D'font-size:
10.0pt;font-family:Arial;color:navy'>A= ny=3D other ideas?

<p= =3D class=3D3D3DMsoNormal> </font&= =3D gt;

Thank= s!=3D 

 

&l= =3D t;p class=3D3D3DMsoNormal>Laurie</font&g= =3D t;

&n= bs=3D p;

 

= =3D = <=3D font size=3D3D3D2 =3D3D
face=3D3D3DTahoma>-----Original =3D3D
M= es=3D sage----- 
From: =3D3D
ddots-l-bounce@freelist= s.=3D org
[mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of &l= t;/s=3D pan>Kevin L. Gibbs 
<span= =3D style=3D3D3D'font-weight:bold'>Sent:&nbs= p;=3D Tuesday, February =3D3D
21, 2006
2:40 PM<br= &g=3D t;
To:</s= pa=3D n> =3D3D
ddots-l@xxxxxxxxxxxxx 
<b&g= t;=3D Subject:<= ;/=3D b> [ddots-l] Re: =3D3D
Motu
Pci-424 audiowi= re=3D ports not working.
 </span= &g=3D t;

<div>

Laurie,= =3D </f=3D3D
ont>

</div>

<div><= BR=3D >
=3D ;  = &a=3D mp;nbsp; color=3D3D3Dblue face=3D3D3DArial>You'll need&= =3D nbsp;a sighted assistant to check this out= =3D =2E  It =3D3D
may be
the case th= at&n=3D bsp;when you connect your mk3 to audio&nbs= =3D p;wire 2, that the inputs =3D3D
on
your&n= bs=3D p;cue mix console are all muted.  = =3D ;Have a sighted assistant make =3D3D
sure&nb= sp=3D ;that
all your cue mix inputs are unmut= =3D ed.  In your case, that will mean= =3D =3D3D
all 48
of them for two boxes.= &a=3D mp;nbsp; When you reverse the order of&nbs= =3D p;the two boxes =3D3D
on the
PCI424, &= ;n=3D bsp;you essentially create a second virgin = =3D ;profile where all =3D3D
the
inputs on cu= e&=3D nbsp;mix and the main output are muted&nbs= =3D p;until a sighted person =3D3D
unmutes
them.&a= mp=3D ;nbsp; Also, you'll have to click on = =3D the main out and make sure =3D3D
that&n= bs=3D p;it is
set to the Analog outs 1&am= =3D p;2 on the correct 2408 box.  Aga= =3D in, =3D3D
with each
"reversal" a&= nb=3D sp;new profile is created and a new o= =3D utput =3D3D
assignment will
have to be ch= ec=3D ked.  this does require sight initiall= =3D y but will be =3D3D
stable
once done.&= ;n=3D bsp; 

</div>
<div>

Kevin</fon=3D3D
t><= BR=3D >
</div>

<blockquote =3D3D
style=3D3D3D'margi= n-to=3D p:5.0pt;margin-right:0in;margin-bottom:5.0pt'>

-----Original
Message----- 
From: =3D= 3Dddots-l-bounce@xxxxxxxxxxxxx
[mailto:ddots-l-bounce@xxxxxxxxxxxxx]&= =3D nbsp;O= nBehalf Of Laurie Simpson = =3D ;
Sent:</= sp=3D an> Tuesday, February =3D3D
21, 2006= 11:02 AM 
To: =3D3D
ddots-l@xxxxxxxxxxx= rg=3D 
S= ub=3D ject: [ddots-l] Motu =3D3D
Pci-= 42=3D 4
audiowire ports not working.</font&g= =3D t;

&=3D lt;span
style=3D3D3D'font-size:10.0pt;font-family:Arial'>Hi g= uy=3D s,

<span
style=3D3= D3D'fo=3D ________________________________________________________________________ Try Juno Platinum for Free! Then, only $9.95/month! Unlimited Internet Access with 1GB of Email Storage. Visit http://www.juno.com/value to sign up today! ----__JWM__J446b.794bS.15fbM Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Content-Type: text/html

Hi,
This message is too big.
Ciao

---------- Forwarded Message ----------

From simp749@xxxxxxxxxxxxx Tue Feb 21 20:02:58 2006
Return-Path: <simp749@xxxxxxxxxxxxx>
X-Original-To: ddots-l@xxxxxxxxxxxxx
Delivered-To: ddots-l@xxxxxxxxxxxxx
Received: from localhost (localhost [127.0.0.1])
by turing.freelists.org (Avenir Technologies Mail Multiplex) with ESMTP =
=3D
id 3E7C82A6049
for <ddots-l@xxxxxxxxxxxxx>; Tue, 21 Feb 2006 20:02:58 -0500 (EST)
Received: from turing.freelists.org ([127.0.0.1])
by localhost (turing [127.0.0.1]) (amavisd-new, port 10024)
with ESMTP id 01741-06 for <ddots-l@xxxxxxxxxxxxx>;
Tue, 21 Feb 2006 20:02:58 -0500 (EST)
Received: from imf22aec.mail.bellsouth.net (imf22aec.mail.bellsouth.net =
=3D
[205.152.59.70])
by turing.freelists.org (Avenir Technologies Mail Multiplex) with ESMTP =
=3D
id DD96A2A5A04
for <ddots-l@xxxxxxxxxxxxx>; Tue, 21 Feb 2006 20:02:57 -0500 (EST)
Received: from ibm67aec.bellsouth.net ([68.219.182.195])
 by imf22aec.mail.bellsouth.net with ESMTP
 id <20060222010257.XUSK20611.imf22aec.mail.bellsouth.net@ibm67=
=3D
aec.bellsouth.net>
 for <ddots-l@xxxxxxxxxxxxx>; Tue, 21 Feb 2006 20:02:57 -0500
Received: from JOBSEARCH ([68.219.182.195]) by ibm67aec.bellsouth.net
 with ESMTP
 id <20060222010255.PDGL1775.ibm67aec.bellsouth.net@JOBSEARCH>
 for <ddots-l@xxxxxxxxxxxxx>; Tue, 21 Feb 2006 20:02:55 -0500
From: "Laurie Simpson" <simp749@xxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Subject: RE: [ddots-l] Re: Motu Pci-424 audiowire ports not working.
Date: Tue, 21 Feb 2006 20:02:47 -0500
Message-ID: <000c01c6374b$b50ab310$210110ac@JOBSEARCH">000c01c6374b$b50ab310$210110ac@JOBSEARCH>
MIME-Version: 1.0
Content-Type: multipart/alternative;
boundary=3D3D"----=3D3D_NextPart_000_000D_01C63721.CC34AB10"
X-Priority: 3 (Normal)
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook, Build 10.0.6626
In-Reply-To: <002601c6371e$9a511730$0401000a@KEVINSNOTEBOOK>
Importance: Normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2670
X-Virus-Scanned: by amavisd-new-20030616-p9 (Debian) at avenirtech.net

This is a multi-part message in MIME format.

------=3D3D_NextPart_000_000D_01C63721.CC34AB10
Content-Type: text/plain;
charset=3D3D"us-ascii"
Content-Transfer-Encoding: quoted-printable

Kevin,

=3D3D20

Good suggestion, only it didn't help in this case. I enabled all of the=
=3D

inputs for both interfaces in Cuemix. Is that the same as unmuting? If=
=3D
=3D3D
so,
no go. The Mk3 interface in Audiowire port 1 works fine. The Mk2 in
Audiowire port 2 gives me no input or output. I even tried selecting =3D=
3D=3D

the
bus main as the analog 1-2 for the 2408 Mk2 also and this didn't work
either.

=3D3D20

Any other ideas?

=3D3D20

Thanks!

=3D3D20

Laurie

=3D3D20

-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]=
=3D
=3D3D
On
Behalf Of Kevin L. Gibbs
Sent: Tuesday, February 21, 2006 2:40 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Motu Pci-424 audiowire ports not working.

=3D3D20

Laurie,

You'll need a sighted assistant to check this out. It may be the =3D=
3D=3D

case
that when you connect your mk3 to audio wire 2, that the inputs on your =
=3D
=3D3D
cue
mix console are all muted. Have a sighted assistant make sure that all =
=3D
=3D3D
your
cue mix inputs are unmuted. In your case, that will mean all 48 of them=
=3D
=3D3D
for
two boxes. When you reverse the order of the two boxes on the PCI424, =
=3D
=3D3D
you
essentially create a second virgin profile where all the inputs on cue =3D=
3D=3D

mix
and the main output are muted until a sighted person unmutes them. =3D3=
D
Also,
you'll have to click on the main out and make sure that it is set to the=
=3D

Analog outs 1&2 on the correct 2408 box. Again, with each "reversal" a =
=3D
=3D3D
new
profile is created and a new output assignment will have to be checked.
this does require sight initially but will be stable once done. =3D3D20

Kevin

-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]=
=3D
=3D3D
On
Behalf Of Laurie Simpson
Sent: Tuesday, February 21, 2006 11:02 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Motu Pci-424 audiowire ports not working.

Hi guys,

=3D3D20

I'm hoping someone has an idea here. I'm running Sonar 4 Producer =3D3D=

Edition
with Windows XP home sp2. I have a P4 processor, 3.2ghz with 1g of ram.=
=3D
=3D3D
If
I connect a Motu 2408 Mk3 to audiowire port 1 on the Pci-424 card,
everything work just great when I ask Sonar to echo input. But when I =3D=
3D=3D

plug
my Motu 2408 Mk2 into Audiowire port 2 and ask Sonar to echo input =3D3D=

through
it, I get nothing. I've gone through all the steps correctly, as far as=
=3D
=3D3D
I
can see to install the Pci-424 card correctly. I even upgraded the =3D3=
D
drivers
to the latest ones from the Motu website, the ones from 11/11/04. This =
=3D
=3D3D
is
the first time I've had the need to hook up two breakout boxes to the =3D=
3D=3D

same
card. Motu says this can be done as long as the newer interface is =3D3=
D
first.
Also, just to try something, I tried connecting the older interface =3D3=
D
first.
That works and then the Mk3 no longer gives me any input echo. I'm =3D3=
D
using
the analog inputs and outputs on the two interfaces. Anyone have any =3D=
3D=3D

ides
how I can get the two to coexist together and echo input? I need more =3D=
3D=3D

mic
preamps than I have on my Mackie Onyx 1620 mixer. I have an Octopre
8-channel mic preamp which I was going to connect via the analog inputs =
=3D
=3D3D
on
the older 2408 Mk2 unit.

=3D3D20

Thanks for any suggestions!

=3D3D20

Laurie

=3D3D20

------=3D3D_NextPart_000_000D_01C63721.CC34AB10
Content-Type: text/html;
charset=3D3D"us-ascii"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>

<title>Message</title>

</head>

<s=3D
pan =3D3D
style=3D3D3D'font-size:
10.0pt;font-family:Arial;color:navy'>Kevin,