pref -DMNAME ST0 for what display is called up pref -DMNAME ENV for what environment is being used to set the current display pref -DMNAME dmcmd "full_path of display" to set the environment pref -DMNAME dmcmd "full_path of environment", eg. pref -DMNAME dmcmd "/opt/customer/env/Initial.env" or pref -DMNAME dmcmd "/usr/fox/sys/Change_Env/Initial" Hope this is what you wanted. Sean -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]On Behalf Of Jeremy Milum Sent: Friday, 28 October 2005 7:22 AM To: foxboro@xxxxxxxxxxxxx Subject: [foxboro] pref question anyone know what the pref commands are to query and set the current environment and display that is called up? -- Patron saints in general are broadband connections to the Almighty - Michelle Delio, Wired News =20 =20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html =20 foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: = mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin to unsubscribe: = mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave =20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave