Henry, Yes, it can be done, but can only be reconfigured via the Display Configurator as far as I can tell. To configure one, go to the Display Builder and then: Select "File" Select "New Display" Select "File" Select "Import" or "Import and Configure" depending on your preference Select "Standard Template" Select "File" In Choice Window, Select "XYplots/" In Choice Window, Select "Full_X_Y" (gives you X_Y with all pertinent buttons) Select "IMPORT" button in bottom left of window Drop the imported trend on the display Select "File" Select "Configure Display" Save the Display to your new filename Load the new file into the configurator Select "Display" Select "Full_X_Y" Configure "Plot Area", "X variable", and "Y variable" as desired. Select "File" Select "Install" Go to DM and View XY graphic Select "GO" button to start the plot Data from files can also be read into the XY plot. (Location of data files must be configured in Display Configurator) Tom VandeWater Control Systems Developer/Analyst Dow Corning Corp. Carrollton, KY -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]On Behalf Of Henry Blekkenhorst Sent: Thursday, December 04, 2003 2:55 PM To: foxboro@xxxxxxxxxxxxx Subject: [foxboro] XY plots on old display manager Can anyone confirm if is possible to somehow configure an xy plot on an the legacy display manager? Thanks Henry Blekkenehorst Process Control Engineer Bowater inc Thunder Bay On. Canada _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave