There is but it's ungraceful. The D box wants to use a DNBT and the B box likes DNBI. There is an offering in the Advantage Upgrade to keep your DNBI. Then you get a couple of little boxes tied together with a VERY unprofessional tie wrap. But it works. Your biggest problem may be finding out that the D box is larger than the B and not having enough space for all of them. -----Original Message----- From: Sivanath Babu [mailto:srisiva@xxxxxxxxxxxxxxx] Sent: Monday, January 14, 2002 7:18 AM To: foxboro@xxxxxxxxxxxxx Subject: [foxboro] WP51B and WP51D There are about 15 WP51Bs intalled in out plant. The DNBIs are in the racks which are located about 30 feet away. My management wants to change to WP51Bs to Ds to keep up with the latest boxes available in the market. The problem is the cables. It is very difficult to lay new cables in the existing cable trays. Is there any way to use the exiting cables? Regards, Sivanath Babu ___________________________________________________________________ This list is neither sponsored nor endorsed by The Foxboro Company. Use the information obtained here at your own risk. For disclaimer, see http://www.thecassandraproject.org/disclaimer.html#maillist list info: //www.freelists.org/list/foxboro subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave ___________________________________________________________________ This list is neither sponsored nor endorsed by The Foxboro Company. Use the information obtained here at your own risk. For disclaimer, see http://www.thecassandraproject.org/disclaimer.html#maillist list info: //www.freelists.org/list/foxboro subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave