Re: [foxboro] The fun never ends - SysDef print report
- From: "Joseph M. Riccardi" <Joe@xxxxxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Thu, 20 Feb 2014 18:22:40 -0800
Then how do I get a report on my system definition? I have done it many
times before to review the configuration and if I need to change something?
Joseph M. Riccardi
386-441-0250 Office
386-451-7607 Cell
Joe@xxxxxxxxxxxxx
"To give real service you must add something that cannot be bought or
measured with money; and that is sincerity and integrity." - Donald A. Adams
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Boulay, Russ
Sent: Thursday, February 20, 2014 6:03 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] The fun never ends - SysDef print report
Same on my sysdef's...just checked...cant say I have ever used the utility
reports in all these years...
No cases entered complaining either....no one probably ever uses it.....
Not that it matters, but sometimes the path is wrong when you look at the
utility menu....but that didn't matter on my test either.
____________________________________________________________________________
_________
Russ Boulay | Schneider Electric | Invensys | United States | Support
Engineering Manager
Phone: +1 508 446 1769 | Mobile: +1 508 446 1769
Email: russ.boulay@xxxxxxxxxxxx | Site: www.invensys.com | Address: 2000
Crow Canyon Place Suite 170, 94583 San Ramon, California, United States
*** Please consider the environment before printing this e-mail
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Joseph M. Riccardi
Sent: Thursday, February 20, 2014 5:35 PM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] The fun never ends - SysDef print report
Folks,
I installed SysDef (V2.Xs & V3.0, same problem with all versions), I open
the *cfg files (we have a number of different dated.cfg files from years
past, same problem with all files), it has to be updated/converted, I view
Parameter Definition, I see all of my
Letterbugs/Pkgs/Descriptions/Parameters/Values, I select
Options/Utilities/Utilities Reports, no matter what report I select and run
all I get are the default listing, not what I see on the screen?
Now I have not edited and/or run SysDef reports in probably 6-7 years but it
cannot be this difficult. What am I missing?
Joseph M. Riccardi
386-441-0250 Office
386-451-7607 Cell
Joe@xxxxxxxxxxxxx
"To give real service you must add something that cannot be bought or
measured with money; and that is sincerity and integrity." - Donald A. Adams
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at your
own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
*** Confidentiality Notice: This e-mail, including any associated or
attached files, is intended solely for the individual or entity to which it
is addressed. This e-mail is confidential and may well also be legally
privileged. If you have received it in error, you are on notice of its
status. Please notify the sender immediately by reply e-mail and then delete
this message from your system. Please do not copy it or use it for any
purposes, or disclose its contents to any other person. This email comes
from a division of the Invensys Group, owned by Invensys plc, which is a
company registered in England and Wales with its registered office at 3rd
Floor, 40 Grosvenor Place, London, SW1X 7AW (Registered number 166023). For
a list of European legal entities within the Invensys Group, please select
the Legal Entities link at invensys.com. Invensys PLC is owned by the
Schneider-Electric Group.
You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail
reception@xxxxxxxxxxxx. This e-mail and any attachments thereto may be
subject to the terms of any agreements between Invensys (and/or its
subsidiaries and affiliates) and the recipient (and/or its subsidiaries and
affiliates).
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
