Ha, I once wrote a program to do this with a Fox 1/A! But, probably a bit obsolete at this point... Regards, Doug DGL Controls -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of rys Sent: Wednesday, January 29, 2014 9:56 AM To: foxboro Subject: Re: [foxboro] Surge Map in FoxView Richard, I've done this on the old DM and with FoxView (older versions). Let me dig up my notes and I'll send you some information on how this can be done. Rick Rys www.r2controls.com 508-369-5186 Cell On Wed, January 29, 2014 6:51 am, Richard Peck wrote: > Good evening my experienced friends. > We use IA 8.6 with FoxView -> > > I would like to plot a compressor surge map... > > This would show a surge line, with 2 or three speed reference curves and > the current position of the compressor. > > (we are replacing an old CCC controller with a Trident System and using > the > DCS FoxView for control) > > Does anyone have some examples / directions on how to accomplish this? > > Thanks, > Richard > > > > > _______________________________________________________________________ > This mailing list is neither sponsored nor endorsed by Invensys Process > Systems (formerly The Foxboro Company). Use the info you obtain here at > your own risks. Read http://www.thecassandraproject.org/disclaimer.html > > foxboro mailing list: //www.freelists.org/list/foxboro > to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join > to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave > > _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave