Mo, I did a successful upgrade from V6.1.2 on a AW51C to V6.5 on a AW51C with rbatchII. Not using IRIS before or after. In this case the AW51C did not host CP60s at V6.1.2 but did host (2) FT pair after at V6.5 I don't see 6.5.1 being an issue unless you have B or C boxes. We loaded the L03-01M Control Station images which are the same as what come with V6.5.1. There will be a L03-02M out soon that will bring B + C boxes to V6.5.2. Regards, Scott L. Landry Regional Lifeline Specialist Site Contracts Manager Southeast USA Foxboro/IPS -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Maurice Moshe Sent: Thursday, June 03, 2004 5:16 AM To: foxboro@xxxxxxxxxxxxx Subject: [foxboro] Rbatch II Rbatch II we have a system where we are running RBATCH II, on I/A 6.1 we want to upgrade the I/A to 6.5.1 to allow addition of CP60 and modbus-fbm I would like to get confirmation for the transport of RBATCH to 6.5.1 regards, maurice moshe _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave