Re: [foxboro] RBatch II
- From: "Joseph M. Riccardi" <Joe@xxxxxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Tue, 17 Feb 2015 11:18:26 -0800
Jim, Doug and Andreas,
Thanks for the feedback, I had hoped it would be this easy...
Joseph M. Riccardi
386-441-0250 Office
386-451-7607 Cell
Joe@xxxxxxxxxxxxx
"To give real service you must add something that cannot be bought or
measured with money; and that is sincerity and integrity." - Donald A. Adams
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of James D Murphy
Sent: Tuesday, February 17, 2015 3:39 AM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] RBatch II
Hi Joe!
I believe you can modify the phase configuration by editing the file:
/opt/rbatch/appl/<app Name>/cfg/oper_cfg
# File: oper_cfg
# Date: Tue Oct 21 18:37:03 2014
#
# NOTE: This file was generated by ModelEd.
# Any changes made by hand may be lost!
OPERATION ACID_FEED CIP
SEQ_BLOCK ACID_FEED
REQ_ACID_FEED_FLOW_RATE RI0002 0 N/A MVL
0 20.0
REQ_ACID_FEED_VOL RI0001 0.0 MS MVL 0.0
20.0
OPERATION AIR_BLOW CIP
SEQ_BLOCK AIR_BLOW
AIR_BLOW_DIMINISH_TIME RI0004 0.0 SEC MVL 0.0
300.0
CHEM_LOOP_BLOW_TIME RI0002 0.0 SEC MVL 0.0
300.0
CIRCUIT_BLOW_TIME RI0001 0.0 SEC MVL 0.0
300.0
The format seems pretty straightforward, and if you have a sandbox machine
you could certainly experiment...
Best regards,
Jim Murphy
Eli Lilly and Company
Indianapolis, Indiana
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Joseph M. Riccardi
Sent: Monday, February 16, 2015 9:28 PM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] RBatch II
Folks,
Yes, some of us are lucky enough to still work on the classics. :)
According to the User's Guide, I can Add, Delete and Change Phases but how
do I copy an existing phase, including the parameters, in the phase editor
to rename it and just modify the old parameters to fit the new recipe
requirements? Is there a back door file I can copy and rename just to get
it in the Phase/Pattern list? It would be easier than Adding it, then
having to create all of the same parameters as an existing phase.
This is outside of my comfort zone so I hope I have adequately described
what would make my life easier; copy and modify...
Thanks.
Joseph M. Riccardi
386-451-7607 Cell
Joe@xxxxxxxxxxxxx <mailto:Joe@xxxxxxxxxxxxx>
"To give real service you must add something that cannot be bought or
measured with money; and that is sincerity and integrity." - Donald A. Adams
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at your
own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at your
own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
