Re: [foxboro] Print Screen Script

On Tue, 27 Jul 2004 15:19:55 -0500, Neil Martin
<neil_martin@xxxxxxxxxxxx> wrote:
> 2.  It probably needs to display the graphic on a designated AW/WP, wait
> momentarily, do a Print Screen to designated printer, wait, then repeat the
> process at a slow enough rate to avoid printer que problems.

It might be better to save the graphics to files and then print them out later,
or perhaps not at all if just viewing them is sufficient.  Also, the
lag between the
first and last graphic (for a large number of graphics) might bee too large
for correlating, even when saving them to files.  Perhaps just make
sure all of the
important points are in your off-line historian and use that to dump all the
points for the specific times.  This would make sure that all the data was
collected at about the same time.
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: