Re: [foxboro] (No Date: Tue, 19 Mar 2002 23:18:15 -0500

From: "Johnson, Alex (Foxboro)" <ajohnson@xxxxxxxxxxx>
To: foxboro@xxxxxxxxxxxxx

I'm not sure that I understand your question, but here goes.

The CP's Station block contains the current date and time in parameters of
the block. Check out the Station block write-up in FoxDoc.

Also, the CALC block can give you the number of seconds since midnight of
the current day (the TIM instruction, I think). You can put that in an
output attribute. Remember that it is reset to 0 each day at midnight.

You can also write a cron script and store the current time in a Shared
Variable. The SV should be created using omcrt in the
/etc/fox/user_apps.dat. The UNIX date command will give you the value to
store.


Hope this helps.


Regards,


Alex Johnson
System Products - Invensys Systems, Inc.
10707 Haddington
Houston, TX 77043
713.722.2859 (office)
713.722.2700 (switchboard)
713.932.0222 (fax)
ajohnson@xxxxxxxxxxx <mailto:ajohnson@xxxxxxxxxxx> 



        -----Original Message-----
        From:   Kalpesh_J_Kamdar@xxxxxxx [SMTP:Kalpesh_J_Kamdar@xxxxxxx]
        Sent:   Tuesday, March 19, 2002 9:49 PM
        To:     foxboro@xxxxxxxxxxxxx
        Subject:        [foxboro] 



        Dear All

        I  want  IA Series System time to link as C.B P in one of the CP for
used
        as variable in one of the application.
        Is it possible ?
        Which are the different method to do it.

        -Kalpesh Kamdar
        Relience petrolium ltd
        Jamnagar-India


         
         
        
_______________________________________________________________________
        This mailing list is neither sponsored nor endorsed by Invensys
Process
        Systems (formerly The Foxboro Company). Use the info you obtain here
at
        your own risks. Read
http://www.thecassandraproject.org/disclaimer.html
         
        foxboro mailing list:
//www.freelists.org/list/foxboro
        to subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
        to unsubscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
         
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             //www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Re: [foxboro] (No Date: Tue, 19 Mar 2002 23:18:15 -0500

Other related posts: