Re: [foxboro] How to extract a Dep Block into Test File
- From: "Johnson, Alex P \(IPS\)" <alex.johnson@xxxxxxxxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Mon, 14 May 2007 04:12:14 -0400
Waleed,
Kevin's advice is correct for both IND and DEP blocks. I'm concerned
that you may have a bad source file. If memory serves (I don't have
access to my lab):
The .s file is the source.
The .r file is what you see in the detail display.
The .i file is what the control block runs.
The .k file is produces for FoxSFC; it is a source file of sorts.
If the .s file does not have what you want then I doubt that you have a
good copy of your source code.
What configuration tool do you use? ICC, FoxCAE, IACC, or IEE
Have you looked at the source using this tool? Does it look correct?
Regards,
Alex Johnson
Invensys Systems, Inc.
10900 Equity Drive
Houston, TX 77041
713.329.8472 (voice)
713.329.1700 (fax)
713.329.1600 (switchboard)
alex.johnson@xxxxxxxxxxxxxxxx
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Khudhair, Waleed K
Sent: Monday, May 14, 2007 1:25 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] How to extract a Dep Block into Test File
Thanks Kevin for your usual support. To tell the truth I tried this and
I was able to view the source of the INDs and TIMERs not the DEPs block.
When I more any DEP block I see only the head of the file "the first 10
lines only" while thru detailed display you can see the whole code.=3D20
Regards, =3D20
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Kevin Fitzgerrell
Sent: Monday, May 14, 2007 10:12 AM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] How to extract a Dep Block into Test File
Waleed,
On your AW that hosts the control station containing your sequence
block, go to:
/opt/fox/ciocfg/COMPOUND_NAME/
Look for the file BLOCKNAME.s - it is a text file of your sequence
logic.
Of course, substitute the above COMPOUND_NAME and BLOCKNAME for your
actual compound and block names.
Regards,
Kevin FitzGerrell
On 5/14/07, Khudhair, Waleed K <waleed.khudhair@xxxxxxxxxx> wrote:
> Hi list,
> This is the first time for me to work with Dep blocks. Thru the
Detailed
> Display I am able to see the code, however for easy reviewing I would
> like to extract the code into a text file, how to do this?
>
> Regards,
>
>
>
>
_______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys
Process
> Systems (formerly The Foxboro Company). Use the info you obtain here
at
> your own risks. Read
http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list:
//www.freelists.org/list/foxboro
> to subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Djoin
> to unsubscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Dleave
>
>
=3D20
=3D20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=3D20
foxboro mailing list: //www.freelists.org/list/foxboro=
to subscribe: =3D
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Djoin
to unsubscribe: =3D
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Dleave
=3D20
=
=
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
=
Confidentiality Notice:
The information contained in this electronic message and any attachment(s) =
to this message are intended for the exclusive use of the recipient(s) and =
may contain confidential, privileged or proprietary information. If you are=
not the intended recipient, please notify the sender immediately, delete a=
ll copies of this message and any attachment(s). Any other use of the E-Mai=
l by you is prohibited.
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
