Adam, thank you, but I don't understand your reply. Please clarify. Regards Joachim Am Freitag, 31.08.07 um 00:04 Uhr schrieb <Adam.Pemberton@xxxxxxxxxxxx>: > Letterbug doesn't change. > > > -----Original Message----- > From: foxboro-bounce@xxxxxxxxxxxxx > [mailto:foxboro-bounce@xxxxxxxxxxxxx] > On Behalf Of Joachim Leuker > Sent: Friday, 31 August 2007 7:28 AM > To: foxboro@xxxxxxxxxxxxx > Subject: [SPAM] - [foxboro] FCP270 and Cluster I/O - Email found in > subject > > > > Hi, list, > > > > here's something I could not find in the documentation: > > > > If a FCP270 is connected to cluster I/O, which letterbugs do the > > modules get? > > > > The one from the FCP with "01" through "21" for the modules (similar to > > the 200 series FBMs) or the one plugged into the cluster I/O nest (as > > it is with the old CPs)? > > > > Regards > > Joachim > > > > > > > _______________________________________________________________________ > This mailing list is neither sponsored nor endorsed by Invensys Process > Systems (formerly The Foxboro Company). Use the info you obtain here at > your own risks. Read http://www.thecassandraproject.org/disclaimer.html > > foxboro mailing list: //www.freelists.org/list/foxboro > to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join > to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave > > _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave