Re: OPC DA Server for FBM232 No. Re: is there a way to get the client to provide C:B.P data to a tag without having to go through a DCI block to map the C:B.P to each tag? No. You need a block in the CP for each value you want to drive into the "other" system. Regards, Alex Johnson Invensys Operations Management 10900 Equity Drive Houston, TX 77041 +1 713 329 8472 (desk) +1 713 329 1600 (operator) +1 713 329 1944 (SSC Fax) +1 713 329 1700 (Central Fax) alex.johnson@xxxxxxxxxxxx -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Johnson, David Sent: Thursday, October 06, 2011 9:20 AM To: foxboro@xxxxxxxxxxxxx Subject: [foxboro] FBM232 with OPC Hello all, I am testing an FBM232 with the OPC client software. I have the following questions 1) is there an OPC server available for the FBM232 2) if I assume there is not, is there a way to get the client to provide C:B.P data to a tag without having to go through a DCI block to map the C:B.P to each tag? I need some way to get the block count down. Thanks, David ________________________________ Confidentiality Notice: The information contained in this message is private and confidential. This information is intended only for the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any use, review, dissemination, distribution, copying or action taken based on this message or its attachments, if any, is strictly prohibited. If you are not the intended recipient, please contact the sender by reply email and delete or destroy all copies of this message and any attachments. Thank you. _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave *** Confidentiality Notice: This e-mail, including any associated or attached files, is intended solely for the individual or entity to which it is addressed. This e-mail is confidential and may well also be legally privileged. If you have received it in error, you are on notice of its status. Please notify the sender immediately by reply e-mail and then delete this message from your system. Please do not copy it or use it for any purposes, or disclose its contents to any other person. This email comes from a division of the Invensys Group, owned by Invensys plc, which is a company registered in England and Wales with its registered office at 3rd Floor, 40 Grosvenor Place, London, SW1X 7AW (Registered number 166023). For a list of European legal entities within the Invensys Group, please go to http://www.invensys.com/en/legal/default.aspx. You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail reception@xxxxxxxxxxxxx This e-mail and any attachments thereto may be subject to the terms of any agreements between Invensys (and/or its subsidiaries and affiliates) and the recipient (and/or its subsidiaries and affiliates). _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave