Rereading this, I should be more specific.
In an EVO 6 system, when importing a SaveAll into BulkData and generating
blocks, it seems the
block name for an ECB must always be the same as DEV_ID.
Does anyone know of a way to divorce these two? So that the DEV_ID and ECB
NAME can be different
values, or, described differently, so the ECB Block name is not overwritten
by the value of DEV_ID.
Thanks
William C Ricker
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of William C Ricker
Sent: Monday, February 06, 2017 12:28 PM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] EVO - ECB Name v. ECB DEV_ID
Friends and neighbors,
In an EVO 6 system, it seems the block name for an ECB must always be the
DEV_ID.
Does anyone know of a way to divorce these two? So that the DEV_IS and ECB
NAME
Can be different valus.
Thanks
William C Ricker
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave