Re: [foxboro] ESD signals time in DCS CAD
- From: "Ahmari, Hani A" <hani.ahmari@xxxxxxxxxx>
- To: "foxboro@xxxxxxxxxxxxx" <foxboro@xxxxxxxxxxxxx>
- Date: Wed, 3 Nov 2010 10:51:48 +0300
The CAD is not showing the exact time of all ESD signals with a different of 8
min.
We are using ACM
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Bounds, Glen
Sent: Wednesday, November 03, 2010 9:12 AM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] ESD signals time in DCS CAD
Which one was correct? Where does the Tricon get its time from? In newer
installations, the Tricon is synchronized from the DCS FBM233 via TSAA through
the TCM module. So, I am guessing this is an older setup with either NCM's or
ACM's.
Best Regards,
Glen
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Ahmari, Hani A
Sent: Wednesday, November 03, 2010 8:17 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] ESD signals time in DCS CAD
Hi gentlemen,
I noticed that there is a problem in CAD alarms. The problem that CAD time for
the ESD alarms is not at the exact time there is shift in time around 8 minutes.
For example the exact time of X alarm is 5:10 AM. In CAD, I found the time of
the same alarm is 5:02 AM.
Please help in this regards to fix the time stamp.
*** Confidentiality Notice: This e-mail, including any associated or attached
files, is intended solely for the individual or entity to which it is
addressed. This e-mail is confidential and may well also be legally privileged.
If you have received it in error, you are on notice of its status. Please
notify the sender immediately by reply e-mail and then delete this message from
your system. Please do not copy it or use it for any purposes, or disclose its
contents to any other person. This email comes from a division of the Invensys
Group, owned by Invensys plc, which is a company registered in England and
Wales with its registered office at 3rd Floor, 40 Grosvenor Place, London, SW1X
7AW (Registered number 166023). For a list of European legal entities within
the Invensys Group, please go to
http://www.invensys.com/legal/default.asp?top_nav_id=77&nav_id=80&prev_id=77.
You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail
reception@xxxxxxxxxxxxx This e-mail and any attachments thereto may be subject
to the terms of any agreements between Invensys (and/or its subsidiaries and
affiliates) and the recipient (and/or its subsidiaries and affiliates).
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
The contents of this email, including all related responses, files and
attachments transmitted with it (collectively referred to as “this Email”), are
intended solely for the use of the individual/entity to whom/which they are
addressed, and may contain confidential and/or legally privileged information.
This Email may not be disclosed or forwarded to anyone else without
authorization from the originator of this Email. If you have received this
Email in error, please notify the sender immediately and delete all copies from
your system. Please note that the views or opinions presented in this Email are
those of the author and may not necessarily represent those of Saudi Aramco.
The recipient should check this Email and any attachments for the presence of
any viruses. Saudi Aramco accepts no liability for any damage caused by any
virus/error transmitted by this Email.
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
