If the error does coincide with the 7 day hot remarry, then possibly you have switch configuration issues. Since the errors are not provided, if they are related to PIOBUS errors or ping test failures..... Need to check that ports are correctly configured adminedge Also, correct spanning tree protocol is properly configured for the ports. _____________________________________________________________________________________ Russ Boulay | Schneider Electric | Invensys | United States | Support Engineering Manager Phone: +1 508 446 1769 | Mobile: +1 508 446 1769 Email: russ.boulay@xxxxxxxxxxxx | Site: www.invensys.com | Address: 2000 Crow Canyon Place Suite 170, 94583 San Ramon, California, United States *** Please consider the environment before printing this e-mail -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Nic Glenister (CD) Sent: Thursday, February 27, 2014 4:34 PM To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] CP fault message The same thing happens to all the CP270s at site here. If you look at your smon_log closely, you'll see that they are EXACTLY one week apart. I always assumed that this was a scheduled 7-day Hot-Remarry and that nothing could be done to stop it. Please let me know if this is not the case ... -----Original Message----- From: Johnson, Alex Sent: Wednesday, February 26, 2014 6:04 AM To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] CP fault message You could/should have your alarm messages sent to your historian. You can review them there using any of a variety of tools from us or third-parties. The log is an alternative as mentioned. Best, Alex _____________________________________________________________________________________ Alex Johnson | Schneider Electric | Invensys | United States | System Architect - Next Generation Systems Phone: +1 713 329 8472 | Fax: +1 713 329 1700 Email: alex.johnson@xxxxxxxxxxxx | Site: www.invensys.com | Address: 10900 Equity Drive, 77041 Houston, TX, United States *** Please consider the environment before printing this e-mail -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of David Church Sent: Tuesday, February 25, 2014 11:36 AM To: foxboro@xxxxxxxxxxxxx Subject: [foxboro] CP fault message Every week or so I get a system alarm for a CP. When I go into SMDH it just shows the asterisk on the block. Is there a way to know what kind of alarm I'm getting? The asterisk isn't much information. I don't see anything in SAL either. David Church Cosmo Specialty Fibers _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave *** Confidentiality Notice: This e-mail, including any associated or attached files, is intended solely for the individual or entity to which it is addressed. This e-mail is confidential and may well also be legally privileged. If you have received it in error, you are on notice of its status. Please notify the sender immediately by reply e-mail and then delete this message from your system. Please do not copy it or use it for any purposes, or disclose its contents to any other person. This email comes from a division of the Invensys Group, owned by Invensys plc, which is a company registered in England and Wales with its registered office at 3rd Floor, 40 Grosvenor Place, London, SW1X 7AW (Registered number 166023). For a list of European legal entities within the Invensys Group, please select the Legal Entities link at invensys.com. Invensys PLC is owned by the Schneider-Electric Group. You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail reception@xxxxxxxxxxxx. This e-mail and any attachments thereto may be subject to the terms of any agreements between Invensys (and/or its subsidiaries and affiliates) and the recipient (and/or its subsidiaries and affiliates). _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave *** Confidentiality Notice: This e-mail, including any associated or attached files, is intended solely for the individual or entity to which it is addressed. This e-mail is confidential and may well also be legally privileged. If you have received it in error, you are on notice of its status. Please notify the sender immediately by reply e-mail and then delete this message from your system. Please do not copy it or use it for any purposes, or disclose its contents to any other person. This email comes from a division of the Invensys Group, owned by Invensys plc, which is a company registered in England and Wales with its registered office at 3rd Floor, 40 Grosvenor Place, London, SW1X 7AW (Registered number 166023). For a list of European legal entities within the Invensys Group, please select the Legal Entities link at invensys.com. Invensys PLC is owned by the Schneider-Electric Group. You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail reception@xxxxxxxxxxxx. This e-mail and any attachments thereto may be subject to the terms of any agreements between Invensys (and/or its subsidiaries and affiliates) and the recipient (and/or its subsidiaries and affiliates). _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave