Re: [foxboro] AIN - SCI

Somehow that didn't come out right.  Anyways, the table I found was not
AB-specific, so it doesn't actually apply.  Thanks for supplying the
correct document Russ!

Thanks,
Philip Pulas

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Pulas, Philip
Sent: Monday, April 23, 2007 9:05 AM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] AIN - SCI

Brian,

Here's what the documentation says: SCI =3D3D 14 Linear (0 to 16383).  =
It
goes on further to say:

SCI =3D3D 14: Linear (0 to 16383)
Analog Input 0 to 20 mA,
Conditioned =3D3D (Raw * (HSCO1 - LSCO1)/16383) + LSCO1

Here are the rest from document B0193AX - Rev T:

2.10 Appendix A - Signal Conditioning Tables
2.10.1 Summary
SCI =3D3D 0: No linearization; output =3D3D input
SCI =3D3D 1: Linear (0 to 64000) ("0 to 100%")
SCI =3D3D 2: Linear (1600 to 64000) ("0 to 100%, Elevated Zero")
SCI =3D3D 3: Linear (12800 to 64000) ("20 to 100%")
SCI =3D3D 4: Square root (0 to 64000) ("0 to 100%")
SCI =3D3D 5: Square root (12800 to 64000), clamped ("20 to 100%")
SCI =3D3D 6: Square root, low cutoff (0 to 64000), clamp < 3/4% ("0 to
100%")
SCI =3D3D 7: Square root, low cutoff (12800 to 64000), clamp < 3/4% ("20 =
=3D
to
100%")
SCI =3D3D 8: Pulse rate
SCI =3D3D 9: Linear, low cutoff (1600 to 64000) ("0 to 100%, Elevated =
=3D
Zero")
SCI =3D3D 10: Linear, low cutoff (12800 to 64000)("20 to 100%")
SCI =3D3D 11 Square root, Intelligent Transmitter 2 (0 to 64000)
SCI =3D3D 12: Linear (14080 to 64000)("20 to 100%, Elevated Zero")
SCI =3D3D 13: Square root, low cutoff (14080 to 64000),("20 to 100%,
Elevated Zero")
SCI =3D3D 14 Linear (0 to 16383)
SCI =3D3D 15 Square root, low cutoff (1600 to 64000)
SCI =3D3D 20: Type B Thermocouple
SCI =3D3D 21: Type E Thermocouple
SCI =3D3D 22 Reserved for future use
SCI =3D3D 23: Type J Thermocouple
SCI =3D3D 24: Type K Thermocouple
SCI =3D3D 25: Type N Thermocouple
SCI =3D3D 26: Type R Thermocouple
SCI =3D3D 27: Type S Thermocouple
SCI =3D3D 28: Type T Thermocouple
SCI =3D3D 40: Copper RTD (SAMA)
SCI =3D3D 41: Nickel RTD (SAMA)
SCI =3D3D 42: Platinum RTD (100 Ohm DIN 43760-1968)
SCI =3D3D 43: Platinum RTD (100 Ohm IEC) (DIN 43760-1980)
SCI =3D3D 44: Platinum RTD (100 Ohm SAMA)

Thanks,
Philip Pulas
Tesoro Corp.
Golden Eagle Refinery
Martinez, CA

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of BrianLong
Sent: Monday, April 23, 2007 8:40 AM
To: Foxboro
Subject: [foxboro] AIN - SCI

Can anyone tell me what an SCI of 14 does for an AIN?  I don't show this
as
a valid SCI in any doc's.  The AIN resides in an INT30 tied to an AB
PLC.
=3D20
Thanks,
Brian Long
Arkasnas Kraft

=3D20
=3D20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=3D20
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         =3D
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Djoin
to unsubscribe:      =3D
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Dleave
=3D20
=20
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=20
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe:      =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
=20
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: