Re: [foxboro] 2nd question CP Loading
- From: Troy L Brazell <tlbrazell@xxxxxxxxxxxxxxx>
- To: foxboro@xxxxxxxxxxxxx
- Date: Fri, 7 Jan 2005 16:22:41 -0600
Would bite the bullet and go to 6.5 ....... we are very happy with 6.5 on
51B boxes.
I do have one system that runs a combo of legacy FBM's and 200's on 51D
boxes at 6.3 with absolutely no problems.
Troy L. Brazell
Duke Energy Field Services
Sr. Process Control Analyst
ISA CCST
Phone (405) 263 4810 ext. 24
Cell (806) 898 4340
Okarche C&M
Route 4 P.O. Box 40
Okarche, OK. 73762
"William C.
Ricker" To:
<foxboro@xxxxxxxxxxxxx>
<wcricker@feedfor cc:
ward.com> Subject: Re: [foxboro] 2nd
question CP Loading
Sent by:
foxboro-bounce@fr
eelists.org
01/07/2005 03:57
PM
Please respond to
foxboro
>> CP60s require V6.2 or later.
Yes, but if you need legacey FBMs, do you need 6.3 ?
Regards,
William C. Ricker
FeedForward, Inc.
Marietta, GA USA
770.426.4422
wcricker @ feedforward.com
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
