[foxboro] a simple challenge

Hi list,

We are going to replace a local relay / timer driven filter cleaning
sequence by "something" in I/A.
We therefore need to separately activate 4 solenoids, one after the oth=
er,
for a variable number of seconds (most likely 2). The interval between
activating the solenoids should also be variable.
I have already made something with a Calc block that generates seconds =
( 0
to 62) connected to a AIN block. On the four boolean alarm limits I
connected the solenoids using a GDEV with the pulse option on. But ther=
e
must be something more brilliant than this, without the use of a DEP bl=
ock.
The solenoids will be connected (2?wire) to FBM41C/42C, therefore a PLB=

solution is an option.
All suggestions are more than welcome.

thanks,

Michel




Michel van den Berg
PFW Aroma Chemicals B.V.
PO Box 415
3770 AK Barneveld
the Netherlands

Phone : (31)342 - 407 791
Fax   : (31)342 - 407 789
email : mvandenberg@xxxxxx
FedEx : Nijverheidsweg 60
        3771 ME Barneveld
        the Netherlands
=


 
 
___________________________________________________________________
This list is neither sponsored nor endorsed by The Foxboro Company.
Use the information obtained here at your own risk. For disclaimer,
see http://www.thecassandraproject.org/disclaimer.html#maillist

list info:   http://www.freelists.org/list/foxboro
subscribe:   mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: