I am looking at a new installation of Foxboro DCS in one plant and an upgrade of versions in another plant and need to decide whether to go with FCS or I/A for the software side of things. Specifically I am trying to decide between Foxview/Foxdraw and the InTouch software. If anyone out there has experience with both and can provide some good information for making this decision I would appreciate the help. Thank you, Patrick Russell Control Systems Engineer Rentech Energy Midwest Company 16675 Highway 20 West P.O. Box 229 East Dubuque, IL 61025-0229 Office : 815.747.3101 x281 prussell@xxxxxxxxxxxxxx<mailto:prussell@xxxxxxxxxxxxxx> _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave