Trying to convert a .g file made on FV 10.4.1 AW to work on a FV 10.2.4
Machine. Using the Display Converter in Foxdraw select G_FDF select the .g file
made on FV 10.4.1 then convert. Getting message 0 of 1 files were successfully
converted message?? Note that the .fdf files work on FV10.4.1?
Here's what I did, so you know the details... On 10.4.1 machine I open .fdf
file and saved. I then converted to g file using the Foxdraw display convert
tool . Moved file to 10.2.4 machine and converted the new .g file back to fdf
file. Then tried to open in FoxDraw and I got the message message 0 of 1 files
were successfully converted message? Has anyone see this problem? If so what's
the fix?
Thanks in advance for your help,
Joe Scott
________________________________
Confidentiality Notice:
The information contained in this message is private and confidential. This
information is intended only for the individual or entity named above. If the
reader of this message is not the intended recipient, you are hereby notified
that any use, review, dissemination, distribution, copying or action taken
based on this message or its attachments, if any, is strictly prohibited. If
you are not the intended recipient, please contact the sender by reply email
and delete or destroy all copies of this message and any attachments. Thank you.
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
