[foxboro] FBM pin schedule

We had some sort of short-circuit in which the pins fused between an FBM8
and the nosecone.  I was wondering if anyone had a pin schedule for the
front pin-board of an FBM8  (DM400YJ)  so I can know which field loop to
look at before plugging in a new card and nosecone.  If looking at the
front of the FBM, the upper-right set of pins, left column, the top dozen
pins, or so.

Thank you.

Brad Wilson
Process Control Engineer
ExxonMobil Chemical Co
Edison Synthetics Plant
732-321-6115
732-321-6177 fax
Brad.S.Wilson@xxxxxxxxxxxxxx

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: