Hi Guys,
We've got a weird problem here, our AW can't see the block parameters in the CP.
We've are using infusion view as the HMI software package, IDE as configuration
tool. After we rebooted our AW yesterday, the AW could't see the block
parameters in CP anymore. On the screen, all the tags shows *****. In block
select, we can see all the compounds, all the blocks. However, when we open the
faceplate on the infusion view, all the parameters in the block show *****. The
system monitor "button" on the HMI screen has no colour change, but if you open
the system monitor, all the indication and function inside the system monitor
are working.( I mean we can see status of other workstation, let CP go online
offline, all the functions are good). All the other WPs are working fine. We
tried to reboot the AW, WP, separately, together... not working. One other
thing, AW can be able to deploy and undeploy configuration...
Anybody has got any idea of what is happening? DASever is down? Licence issue?
Seems like infusion view can't get any parameter from CP, but the AW itself is
still on the mesh network...
Thanks Guys in advance!
Regards,
Siry
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
