Thanks Ray, I hope that has been my problem. From: elky-bounce@xxxxxxxxxxxxx [mailto:elky-bounce@xxxxxxxxxxxxx] On Behalf Of Ray Buck Sent: Friday, October 14, 2011 8:37 AM To: elky@xxxxxxxxxxxxx Subject: [elky] Admin: addresses and file size I've seen numerous notifications of bounced posts because of non-subscribed email addresses and file sizes that are over the list's limit (500kb). Here's the deal: If you have multiple email addresses, you can only post to the list with the one you subscribed with. It's possible to add a second or third address, but then you'll get 2 or 3 copies of each and every post. I have numerous email accounts, so I have to be careful when composing a post to the list to ensure that it's sent from the proper one, otherwise, the post goes of into the great bit bucket in the sky and I get an email telling me about it. So if you've posted to the list and your post didn't show up, this is probably why. I've also seen bounces because a message is too large. I set the max message size to 500k, which is big enough for most posts. Generally, the bounces are those that have a video clip or original, unedited photo attached to them. I recommend not doing this. If you have a video you'd like others to see, put it on youtube and post the link. If you've taken a photo and want to attach it, edit it to reduce its size before posting. Another suggestion: when you're replying to a previous post that has embedded images, remove those that you're not specifically addressing in your reply. This helps conserve bandwidth and makes life easier for those on slow connections. Just a coupla suggestions to help ensure that your posts to the lists get there. r