[earn-chat] Re: EARN Balloon Launch 2016 ?

  • From: KG6YGC <kg6ygc@xxxxxxxxx>
  • To: earn-chat@xxxxxxxxxxxxx
  • Date: Tue, 29 Mar 2016 09:45:34 -0700

Ok thanks.  What's the payload weight and our target neck lift? 

On Mar 29, 2016, at 09:08, David Smith <davew6dps@xxxxxxxxx> wrote:

I have just been using an ascent rate of 4 mps and an average descent rate of 
7 mps. Those were the rates we calculated before.

I think we were figuring a 300 grams balloon.

David P Smith
Tripoli 15803
NAR 78668
Amateur Extra: W6DPS
ROC Board Member

On Mar 29, 2016 6:31 AM, "KG6YGC" <kg6ygc@xxxxxxxxx> wrote:
I don't recall what the balloon size was.  I can get a 200g or a 300g pretty 
cheaply.  What are you using in your model? 

-bb

On Mar 28, 2016, at 14:39, David Smith <davew6dps@xxxxxxxxx> wrote:

Unfortunately similar to the response to previous suggestions.

I have tracker and video payloads still ready to go.

If you run simulations for the next couple of weeks they are quite variable.

I am available on about half of the weekends through the end of Spring.

If there us a good time for you, Dan, or may be a couple choices, post and 
see if we can get things going!

David P Smith
Tripoli 15803
NAR 78668
Amateur Extra: W6DPS
ROC Board Member

On Mar 26, 2016 7:43 PM, <wa6pzb@xxxxxxxx> wrote:
Hello Guys,

 

I have my T3-mini/SRB MX145/ADS-GM2 APRS package ready along with the 
original beacon only package. It has been ready since last year.

 

Are we ready to plan another balloon launch? The weather is getting nice. 
If we can have an equipment dry run day followed by a launch day maybe on 
separate weekends, I think we will be set.

 

Last year we attempted on 4/4/2015, perhaps we can target a May date.

 

 

APRS package:

<image002.jpg>

 

Beacon only package:

<image006.jpg>

 

 

 

 

From: earn-chat-bounce@xxxxxxxxxxxxx 
[mailto:earn-chat-bounce@xxxxxxxxxxxxx] On Behalf Of David Smith
Sent: Saturday, July 25, 2015 21:32
To: earn-chat@xxxxxxxxxxxxx
Subject: [earn-chat] Re: Interesting Predictions

 

Dan,

 

I just need to charge the cameras. It can be ready to fly tomorrow.

 

Why a simulated file? Wouldn't it be good to just assemble the tracker and 
test it?

 

It would be good to have actual elevation change. Maybe up the 18 toward 
Big Bear/Running Springs? The road gives fairly good coverage of the San 
Bernardino area, and climbs up to about 7,000'.  Any other routes that 
might work?

 

Another option is to do it like an old fashioned mobile fox hunt. Take the 
tracker to an undisclosed location, and see if we can find it. Maybe a 
hill top?

 

Using the tracker and a mobile antenna should give a fairly good radius 
for the signal. Move to a different frequency for the test to see how well 
we can track directly.

 

David P Smith

Tripoli 15803, NAR 78668, L2

Amateur Extra, W6DPS

 

On Sat, Jul 25, 2015 at 8:54 PM, <wa6pzb@xxxxxxxx> wrote:

Hi Dave,

 

How is the photography payload? I am very close to completing the 
T3-mini/SRB MX145/ADS-GM2 APRS package. I just tuned the dipole this 
weekend. I will send full details once completed.

 

Are we still good for a dry run with a simulated flight profile? I will 
generate a simulated GPS data file and run that into the tracker. The 
tracker will be car mounted but we can verify everyone’s gear before the 
real launch because they will have to find me!

 

73, Dan

 

From: earn-chat-bounce@xxxxxxxxxxxxx 
[mailto:earn-chat-bounce@xxxxxxxxxxxxx] On Behalf Of David Smith
Sent: Tuesday, July 21, 2015 01:11
To: earn-chat@xxxxxxxxxxxxx
Subject: [earn-chat] Interesting Predictions

 

The winds and winds aloft are somewhat unusual for this time of year. Must 
be El Nino or climate change.

But the predictions are actually running favorable to a launch from either 
our primary spot, landing in Johnson Valley, or from Lucerne Dry Lake and 
landing in the Newberry Springs area.

We may not have to wait for fall...

David P Smith
Tripoli 15803
NAR 78668
Amateur Extra: W6DPS
ROC Board Member




--

 

 

Other related posts: