I will try this when I am really in the office. Thanks. Merci! Brett Winchester KD7JN bwinchester@xxxxxxxxxxxxxxx 208.639.8386 ________________________________ From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of George Bell Sent: Wednesday, January 07, 2009 2:21 AM To: duxuser@xxxxxxxxxxxxx Subject: [duxuser] Re: quick memory loss question left margins interpoint Hi Brett, I would suggest that if you use a Form size of "Narrow Width, 11 inch, Braille Paper" you will achieve what you want. That will default to 32 characters by 25 lines. You can select this by opening the .DXP file, then Embosser Setup from the Document menu, and re-translating. George. From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of Brett Winches Sent: 06 January 2009 21:37 To: duxuser@xxxxxxxxxxxxx Subject: [duxuser] quick memory loss question left margins interpoint I need to set temporarily a margin so that I can emboss a 30 or 32 character line for 8.5 x 11 page cuts from 11 x 11 paper. Is there a quick and dirty way to do this? Or better yet how can you set up a template for this? Thank you! Brett Winchester KD7JN bwinchester@xxxxxxxxxxxxxxx Reading and Braille transcription Services ICBVI PO BOX 83720 341 W WASHINGTON STREET BOISE IDAHO 83720-0012 208.639.8386 direct 208.334.3220.104 1.800.542.8688 208.334.2963 fax