Hi Kristina,
See my message just posted - two fill in the blanks examples are shown as 3 6 ,
3 6 in the UEB Rules quoted.
George
From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] On ;
Behalf Of Malloy, Kristina
Sent: 27 July 2016 15:07
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Re: codes
Do you know why I'm getting 4 6 then 3 6 when I do a continuous dash? When I'm
creating a document that has a fill in the blank.
Thanks,
Kristina
KRISTINA MALLOY MATERIALS TECHNOLOGY FACILITATOR
PITTSBURGH PUBLIC SCHOOLS
2323 BRIGHTON ROAD PITTSBURGH, PA 15212
412-529-3159 (W) | 412-224-4829 (F) |
kmalloy1@xxxxxxxxxx<mailto:kmalloy1@xxxxxxxxxx>
________________________________
From: duxuser-bounce@xxxxxxxxxxxxx<mailto:duxuser-bounce@xxxxxxxxxxxxx>
<duxuser-bounce@xxxxxxxxxxxxx<mailto:duxuser-bounce@xxxxxxxxxxxxx>> on behalf
of Bob Watson <bwatson1252@xxxxxxxxxxx<mailto:bwatson1252@xxxxxxxxxxx>>
Sent: Wednesday, July 27, 2016 10:03 AM
To: duxuser@xxxxxxxxxxxxx<mailto:duxuser@xxxxxxxxxxxxx>
Subject: [duxuser] Re: codes
6 then 3 6 is correct under the UEB rules.
On 07/27/16,
asmandel1<dmarc-noreply@xxxxxxxxxxxxx<mailto:dmarc-noreply@xxxxxxxxxxxxx>>
wrote:
I am using 11.3 (SR1). My proofreader tells me that in my previous very old
Duxbury when I used the double dash it was 3 6 and 3 6. She tells me now that
when I use that it is not correct and it should be 6 and then 3 6. I looked
under codes but I couldn't find any code for a double dash. What should I do to
indicate a correct double dash now days?
From: George Bell<mailto:george@xxxxxxxxxxxxxxxxxxx>
Sent: Wednesday, July 27, 2016 6:34 AM
To: duxuser@xxxxxxxxxxxxx<mailto:duxuser@xxxxxxxxxxxxx>
Subject: [duxuser] Re: codes
Hi,
Do you have 11.3 (SR1) installed, or just the initial 11.3?
Can you also give us an example of the text which you believe is incorrect
please?
George
From: duxuser-bounce@xxxxxxxxxxxxx<mailto:duxuser-bounce@xxxxxxxxxxxxx>
[mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of asmandel1
Sent: 27 July 2016 04:38
To: duxuser
Subject: [duxuser] codes
The dash is not translating correctly from print to to braille in 11.3. Is
there a code I should be using to get it?
* * * * This message is via list duxuser at freelists.org. * To unsubscribe,
send a blank message with * unsubscribe * as the subject to
duxuser-request@xxxxxxxxxxxxx<mailto:duxuser-request@xxxxxxxxxxxxx> . You may
also * subscribe, unsubscribe, and set vacation mode and other subscription *
options by visiting www.freelists.org<//www.freelists.org> . The list
archive * is also located there. * Duxbury Systems' web site is
www.duxburysystems.com<http://www.duxburysystems.com> * * *
