[duxuser] Re: Creating the full braille cell in print
- From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
- To: <duxuser@xxxxxxxxxxxxx>
- Date: Sun, 30 Aug 2009 16:24:18 +0100
Hi Tracy,
In DBT if you type the word "For" (Without the quotes, and with a
capital F) and then translate, you will get a full cell of 6 dots,
preceded by dot 6.
George.
From: duxuser-bounce@xxxxxxxxxxxxx
[mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of Tracy
Sent: 30 August 2009 15:23
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Re: Creating the full braille cell in print
Good morning Betsy,
I need the capital sign to appear before the full Braille cell in the
Braille print out.
I am helping a lady learn Braille and I need to show her the position
of the dot 6 in front of the full Braille cell.
thanks
Tracy
----- Original Message -----
From: Betsy Whitney <mailto:brailleit@xxxxxxxxxxxxx>
To: duxuser@xxxxxxxxxxxxx
Sent: Saturday, August 29, 2009 7:38 PM
Subject: [duxuser] Re: Creating the full braille cell in print
Aloha Tracy,
I'm not sure exactly what you are asking. Do you mean that you
want the full cell to show in a print document or in a braille
document?
Betsy
At 11:38 AM 8/29/2009, you wrote:
Good afternoon list,
How do I show the full Braille sign with the dot 6 in front to
indicate the capital sign in print?
I am using Duxbury 10.7
Thanks in advance
Tracy
Other related posts:
