[duxhelp] Re: Embossing - Index Basic D + Removing embossers
- From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
- To: <duxhelp@xxxxxxxxxxxxx>
- Date: Wed, 22 Mar 2006 11:32:45 -0000
Peter,
Seriously red face here --- but I do have a very feeble
excuse.
I've not checked all of DBT for consistency, but I am so
used to the "OK" button being on the left, I sometimes
forget (even though it's "Yes"), and mouse click the left
button out of habit. It's especially bad when the order is
reversed in more or less adjacent dialogs.
Sorry again,
George.
-----Original Message-----
From: duxhelp-bounce@xxxxxxxxxxxxx [
mailto:duxhelp-bounce@xxxxxxxxxxxxx] On Behalf Of Peter
Sullivan
Sent: 22 March 2006 11:04
To: duxhelp@xxxxxxxxxxxxx
Subject: [duxhelp] Re: Embossing - Index Basic D + Removing
embossers
George,
You're unable to remove all the embossers with the DBT 10.6
beta?
This isn't a problem for me.
As you'll recall, this was the case for a time during DBT
10.5 beta testing.
- Peter
-----Original Message-----
From: duxhelp-bounce@xxxxxxxxxxxxx [
mailto:duxhelp-bounce@xxxxxxxxxxxxx]
Sent: Wednesday, March 22, 2006 5:59 AM
To: duxhelp@xxxxxxxxxxxxx
Subject: [duxhelp] Re: Embossing - Index Basic D + Removing
embossers
Peter,
While you are looking at this, could you also find out why
one cannot remove the last embosser? That is to say, if I
have three embossers set up, and wish to remove them all, I
can get rid of any two, but not the third.
George.
-----Original Message-----
From: duxhelp-bounce@xxxxxxxxxxxxx
[mailto:duxhelp-bounce@xxxxxxxxxxxxx] On Behalf Of Peter
Sullivan
Sent: 22 March 2006 10:26
To: duxhelp@xxxxxxxxxxxxx
Subject: [duxhelp] Re: Embossing - Index Basic D
George,
Sorry. I was reading too quickly.
I'll look into this with David.
- Peter
-----Original Message-----
From: duxhelp-bounce@xxxxxxxxxxxxx
[mailto:duxhelp-bounce@xxxxxxxxxxxxx] On Behalf Of George
Bell
Sent: Wednesday, March 22, 2006 4:37 AM
To: duxhelp@xxxxxxxxxxxxx
Subject: [duxhelp] Re: Embossing - Index Basic D
Peter,
As the second line of my original message below says, "Index
Basic "D" - Firmware 11.3.2".
George.
-----Original Message-----
From: duxhelp-bounce@xxxxxxxxxxxxx
[mailto:duxhelp-bounce@xxxxxxxxxxxxx] On Behalf Of Peter
Sullivan
Sent: 21 March 2006 22:00
To: duxhelp@xxxxxxxxxxxxx
Subject: [duxhelp] Re: Embossing - Index Basic D
George,
Specifically what Index firmware version are you using?
- Peter
-----Original Message-----
From: duxhelp-bounce@xxxxxxxxxxxxx
[mailto:duxhelp-bounce@xxxxxxxxxxxxx] On Behalf Of George
Bell
Sent: Tuesday, March 21, 2006 11:21 AM
To: duxhelp@xxxxxxxxxxxxx
Subject: [duxhelp] Re: Embossing - Index Basic D
Peter,
This behaviour is confirmed with Beta 1.
George.
________________________________
From: duxhelp-bounce@xxxxxxxxxxxxx
[mailto:duxhelp-bounce@xxxxxxxxxxxxx] On Behalf Of George
Bell
Sent: 21 March 2006 14:42
To: duxhelp@xxxxxxxxxxxxx
Cc: Kevin Sanderson
Subject: [duxhelp] Embossing - Index Basic D
Peter, this applies to 10.5, but we'll check with Beta ASAP.
Index Basic "D" - Firmware 11.3.2
With "Generic Interpoint" setting of 29 or 30 cells and 28
lines per page, NO binding margin, braille is "back to back"
With "Index Basic D" Version III, 10.25 or newer, the even
numbered page is moved over one cell from the binding edge.
George
* * *
* This message is via list duxhelp at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may
also
* subscribe, unsubscribe, and set vacation mode and other
subscription
* options by visiting //www.freelists.org. The list
archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
* * *
* This message is via list duxhelp at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may
also
* subscribe, unsubscribe, and set vacation mode and other
subscription
* options by visiting //www.freelists.org. The list
archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
* * *
* This message is via list duxhelp at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may
also
* subscribe, unsubscribe, and set vacation mode and other
subscription
* options by visiting //www.freelists.org. The list
archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
* * *
* This message is via list duxhelp at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may
also
* subscribe, unsubscribe, and set vacation mode and other
subscription
* options by visiting //www.freelists.org. The list
archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
* * *
* This message is via list duxhelp at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may
also
* subscribe, unsubscribe, and set vacation mode and other
subscription
* options by visiting //www.freelists.org. The list
archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
Other related posts:
